Best Single Turbo Manifold Intercooler Piping for 2024

By Customer Ratings

1
Image

Product Highlights

  • Stainless steel downpipe available at most reasonable rates 
  • Designed and made for improved performance gains
  • Newly designed best suitable kit in the market 

2
Image

Product Highlights

  • Function - Reducing the heat load of the engine caused by supercharging, therefore increase intake air volume
  • Package Contents- 2 x Straight Aluminum Pipes; 2 x 45 Degree Aluminum Pipes; 2 x 90 Degree Aluminum Pipes; 2 x 180 Degree Aluminum U Pipes; 2 x 90 Degree Silicone Hose + 6 x Straight hose; 16 x Stainless Steel T-Clamps
  • Advantages - Made of high quality T-6061 lightweight aluminum. Anodized aluminum pipes can resist wear, rust and corrosion for extra durability
  • Feature - Engineered to reduce failures. Quality tested for trouble-free performance. Quick and easy installation
  • Dimension - Pipe Inlet Diameter(Silicone Hose):3"(76mm);Pipe Outlet Diameter(Aluminum):3"(76mm);Aluminum Pipe Length:23.62" / 60cm
3
Image

Product Highlights

  • This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement(modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line.
  • 2.5" piping diameter, Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping.
  • Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention.
  • Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
  • 【8-Piece Piping Set Includes】:1 x 28"x7"x 2.5" Intercooler; 2 x 90 Degrees Mandrel Bent Pipes; 2 x 45 Degrees Mandrel Bent Pipes; 2 x 75 Degrees Mandrel Bent Pipes; 2 x Straight Mandrel Bent Pipes; 6 x Straight Couplers; 2 x 90 Degrees Elbow Couplers; 16 x Clamps
4
Image

Product Highlights

  • ▲ Replace Part # ----- F4TZ-6K854-A, F4TZ-6K854-D, F6TZ-6K854-A on various 1994 1995 1996 1997 Ford F-350 F-250 XLT XL Standard Cab/Extended Cab/Crew Cab 7.3L Powerstroke Diesel Models
  • ▲ Bellowed Up Pipes 7.3 ----- Replace the factory exhaust feed system (exhaust manifold to the turbocharger) which is prone to leakage due to the deterioration of the exhaust crush donuts
  • ▲ OEM Fit, Quality, Finish ----- This exhaust manifold pipe kit has gone through rigorous test for perfect fit and function that exceeds OEM specifications
  • ▲ Package including: 2 Turbo Up Pipes,1 Y-connector, 4 Flanges, 2 Gaskets, 8 Bolts, 4 Nuts
  • ▲ We inspected every product before sending out,to ensure you have the best quality product,and the best value.If you have any problem please feel free to contact us.
5
Image

Product Highlights

  • Replacement For Volkswagen GTI FWD MK7 (2015-PRESENT) 2.0T
  • For Volkswagen Golf R (requires trimming) 4-Motion MK7 (2015-PRESENT) 2.0T
  • Over 15 -20 Degree drop in ambient cooling temperatures
  • High flow cast end tanks ensuring optimum air transition for cooling efficiency
  • This liner means that the hoses are suitable for use with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist.
6
Image

Product Highlights

  • CHEVY GM LS Turbo Exhaust Hotparts T4 Kit Vortec V8 4.8 5.3 6.0 LSX Manifolds
  • *****NO NEED TO RELOCATE ALTERNATOR LIKE THE OTHER GUYS
  • 1999-Current
  • 4.8/5.3/5.7/6.0/6.2 V8
  • Super Strong Design Custom Swap Setup
7
Image

Product Highlights

  • This Intake Elbow has 3 1/8 NPT Fitting For Gauges.
  • Mandrel bent tubing with full TIG welds and pressure tested
  • Aluminum construction for a lifetime of rust free performance and heat dissipation
  • Comes with a Mandrel bent aluminum tube and CNC base plate designed to hold even the highest boost levels.
  • Designed to fit all 2003-2007 Dodge Ram 5.9L Cummins Diesel
8
Image

Product Highlights

  • Application: Universal;Perfect Replacement for upgrade your turbo system
  • Made of high quality T-6061 lightweight aluminum,polished
  • Aluminum Pipe Length: 23.6" / 60cm; Thickness: 1.8mm
  • Anodized aluminum pipes resist wear, rust Replacement for extra durability
  • Polished surface,High quality, unbeatable price
9
Image

Product Highlights

  • Front Mount Intercooler overall size 31"X13"X3", 2.5" Inlet & Outlet, coresize 23"x10.5"x2.5"
10
Image

Product Highlights

  • Warranty: Yes
  • Condition: New
  • Installation Guide: Not Included; Professional installation is highly recommended
  • Manufacturer Part Number: IC-SI1001-AMA-L1
  • Compatible/Replacement For: Universal - NOT A DIRECT BOLT ON
12
Image

Product Highlights

  • Direct fit for the 1999-2003 Ford 7.3L Powerstroke
  • Overall Size: 38.1" x 20.4" x 2.7" / Core Size: 30" x 18" x 2"
  • Construction: Tube and Fin / Inlet: 3.23" / Outlet: 3.23"
  • End tanks strategically designed for optimal airflow
  • Mishimoto Lifetime Warranty
13
Image

Product Highlights

  • This 2.5’’ intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line.
  • Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping.
  • Solid all-welded aluminum construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with electrophoresis of waterproof and rust prevention.
  • Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
  • Package Include: 2x Straight Anodized Aluminum Pipe; 6x 90 Degree Mandrel Bent Long Aluminum Pipe; 4x 135 Degree Mandrel Bent Short Aluminum Pipe; 8x Straight Silicone Couplers; 4x Elbow Silicone Couplers; 24x Stainless Steel T Bolt Clamps
14
Image

Product Highlights

  • ❤Made of high quality Aluminum.
  • ❤Easy to install,durable and reliable.
  • ❤Pipe Length: 76mm/3.00";OD:76mm(3 inch)
  • ❤ Package Included: 2x Aluminum Pipe. (100% Brand New Never Used Or Installed)
  • ❤Customer Service: If you have any questions, please contact us and we will solve them as soon as possible, except weekends and holidays.
15
Image

Product Highlights

  • Fits: 2007-2013 Mini Cooper S R56 & R57
  • Inlet: 2" / Outlet: 2"
  • Core Size: 20.25" x 8" x 3.25" / Overall Size: 30.5" x 9.5" x 6"
  • All aluminum alloy construction assembled using 100% precision TIG welds
  • 10 Year Manufacturer Warranty
16
Image

Product Highlights

  • For Ford Excursion 2000-2003; For Ford F-250 F350 F450 F550 Super Duty 1999-2003
  • Replacement OEM ( Original Equipment Part) Number: F81Z6K682CARM, F81Z6K682BARM, F81Z-6K682-CARM, F81Z-6K682-BARM. Other Part Number: 1831383C92, 1831450C94, 1831450C9, 1831452C91, 1831383C93, 1831383C94, 702011-0009, 702011-0011, 702012-0004, 702012-0005, 702012-0010, 702012-0012, 702012-9010, 706447-9003, 702012-9006, 702012-5006S, 702012-5010S.
  • Enhance Performanc.Easy Installation.High Reliability
  • Perfect Match for the Original Car.Please verify Fitment or Application
  • Aftermarket Product with Premium Quality. 1 Year Warranty
17
Image

Product Highlights

  • Six threaded mounting points for universal fitment
  • Overall Size: 28" x 7.5" x 2.5" / Core Size: 20.5" x 6.25" x 2.5"
  • Inlet & Outlet: 2.5" / Tank Wall Thickness: 5mm / Max PSI: 22
  • Robust, one-piece cast aluminum end tanks withstand high boost pressures
  • Mishimoto Lifetime Warranty
18
Image

Product Highlights

  • Pipe OD: 2 ", aluminum pipe length: 23.62" / 60cm, thickness: 1.8mm
  • Package Includes: 2Pcs OD: 2" Straight Aluminum Pipes; 2Pcs OD: 2" 45 Degree Aluminum Pipes; 2Pcs OD: 2" 90 Degree Aluminum Pipes; 2Pcs OD: 2" 180 Degree Aluminum U Pipes; 2Pcs Black ID: 2" 90 Degree Silicone Hose; 6PCS ID:2" Straight hose; 16Pcs 2" Stainless Steel T-Clamps
  • The tube set is mainly used Replacement for automobile reReplacement forting the turbocharger cooling inter-cooled device pipe of the suite and admission line
  • Perfect Replacement for All Turbo DIY Project
  • Anodized T6061 aluminum and polished surface pipes resist wear, rust Replacement for extra durability
19
Image

Product Highlights

  • Complete way to add grapple or other function to your John Deere 1025E, 1026R, 1025R, 2025R, and 2026R with 120R Loader
  • Complete way to add grapple or other function to your John Deere 1023E, 1026R, and 1025R Tractor Models with H120 Loader
  • The ergonomic joystick handle with integrated momentary trigger threads directly onto existing joystick lever for easy and comfortable operation
  • 1/4” Ag Style Couplers and fittings fit John Deere Subcompact 1000 and 2000 series tractors
  • Hydraulic hoses made to fit the John Deere 1025E, 1026R, 1025R, 2025R, and 2026R with 120R or H120 Loader
  • Hydraulic hoses made to fit the John Deere 1023E, 1026R, and 1025R Tractor Models with H120 Loader
  • Works with Double or Single Acting Cylinders
20
Image

Product Highlights

  • Made of high quality aluminum material, durable
  • Corrosion resistance and light weight
  • Easy to install and uninstall
  • Pipe Diameter: 2.5"; Pipe Thickness: 1/16 inch / 1.58 mm; Length: 18"
  • Package Includes:2 x 90 Degree Pipes; 2 x 75 Degree Pipes; 2 x 45 Degree Pipes; 2 x Straight Pipes; 16 x T-Bolt Clamps; 2 x Elbow Hoses; 6 x Straight Hoses
21
Image

Product Highlights

  • Divided T4 Gasket
  • Fit for Any Divided T4 Turbo Twin Scroll
  • High Quality Stainless Steel
  • Easy to Install
  • Rated To 1000HP
23
Image

Product Highlights

  • 45 Degree Bend, Leg Length: 4" (100mm), Outside Diameter: 3" (76mm), Wall thickness: 0.071''(1.8mm)
  • High Class Surface Treatment. Designed to be cut, spliced or welded to fit custom applications
  • Fit for air intake, cooling systems, turbo intercooler piping setup
  • The precise mandrel-bent aluminum tubing keeps air flow uniform, smooth and free-flowing.
  • Made from high-quality 6061 aluminum alloy, fit for a wide spectrum of custom applications while withstanding high heat and stress.
25
Image

Product Highlights

  • Pipe OD: 2.5 ", aluminum pipe length: 23.62" / 60cm, thickness: 1.8mm
  • The tube set is mainly used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line
  • Anodized T6061 aluminum and polished surface pipes resist wear, rust and corrosion for extra durability
  • Universal fitment, depending on the size of your Intercooler
  • Package Includes: 2 x Straight Aluminum Pipes; 2 x 45 Degree Aluminum Pipes; 2 x 90 Degree Aluminum Pipes; 2 x 180 Degree Aluminum U Pipes; 2 x 90 Degree Silicone Hose + 6 x Straight hose; 16 x Stainless Steel T-Clamps
27
Image

Product Highlights

  • Inner Diameter: 3.0"(76mm).Length: 102mm one leg. Thickness: 5MM
  • The silicone hose is made of high quality silicone, many size to choose with 2pcs T-Bolt Clamp
  • Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. Bursting pressure: 2MPA
  • Universal Application for 90 degree connecting turbo piping or intake piping
  • Silicone 4-Ply 90 degree silicone hose
28
Image

Product Highlights

  • Aluminum pipes are made of high quality T6061 aluminum.
  • Pipe OD: 76mm ( 3 inches), Wall Thickness: 16 Gauge, Pipe Length: 600 mm
  • Hoses are made of Premium Quality Silicone, with enhanced strength and durability
  • 4-Ply Nylon reinforcement Silicone Hose, Thickness:5 mm, Bursting Pressure:2 Mpa, Size tolerance:+/-0.5 mm
  • Working Temperature:-76 °F (-60 °C ) to +500 °F (+260 °C), Working Pressure:0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI)
30
Image

Product Highlights

  • √ Pipe OD: 2 .5", aluminum pipe length: 23.62" / 60cm, thickness: 1.8mm
  • √ Silver aluminum pipe: total lenth=24" or 600mm;Thickness:1.8mm ;Made of high quality T6061 aluminum
  • √ Silicone hose: Made of high quality Silicone, 3-Ply reinforcement
  • √ T bolt clamp: Made of high quality 301 Stainless steel material
  • √ Universal fitment, depending on the size of your Intercooler
31
Image

Product Highlights

  • 3 Inch Upgrade Replacement Performance Turbo Charged Kit Made of High Quality Light Weight T6061 Aluminum
  • Black Pipe Diameter: 3"; Pipe Thickness: 1/16 inch (1.58 mm) ; Length: 18 inch (457mm);Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI)
  • Perfect for All Turbo DIY Project,Increases Up to 65% Air Flow Compared to Standard Bent Piping
  • Triple Reinforced Silicone Able to Withstand High Heat and Pressure, Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine movement
  • Package Includes: 2 x 90 Degree Pipes; 2 x 135 Degree Pipes; 2 x U-Pipes; 2 x Straight Pipes; 16 x T-Bolt Clamps; 2 x Elbow Hose ; 6 x Straight Hoses
32
Image

Product Highlights

  • ✔Turbo Specification: Inlet Diameter: 3" / Outlet Diameter: 2"
  • ✔Turbine wheel: Exducer: 2.48" & Mayor: 2.89" ; Compressor wheel: Exducer: 2.07" & Mayor: 2.36"
  • ✔Compressor Wheel: .55 Trim; A/R Compressor: .50 A/R; A/R Turbine: .63 A/R
  • ✔Package Include: 1x T3/T4 Turbocharger, 1x Oil Feed Line, 1x Oil Return Line, 1x 35/38mm Wastegate (Random Color), 1x 5 Bolt Turbo Dow npipe, 1x Turbo Boost Gauge, 1x Turbo Intercooler, 1x Tubo Boost Controller, 1x Type-S Blow Off Valve (Random Color), 1x BOV Adapter, 1x Turbo Piping Kit. You will get exactly as shown in the picture
  • ✔NOTE: This is T3 T4 universal turbo kit which fit for 1.5L-2.5L engines, you make it fit. It will work for whatever you have the skill for. This is NOT specific to ANY vehicle.Professional installation is highly recommended (No Instruction Included)
33
Image

Product Highlights

  • Pipe OD: 2 ", aluminum pipe length: 23.62" / 60cm, thickness: 1.8mm
  • The tube set is mainly used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line
  • Anodized T6061 aluminum and polished surface pipes resist wear, rust and corrosion for extra durability
  • Universal fitment, depending on the size of your Intercooler
  • Package Includes: 2 x Straight Aluminum Pipes; 2 x 45 Degree Aluminum Pipes; 2 x 90 Degree Aluminum Pipes; 2 x 180 Degree Aluminum U Pipes; 2 x 90 Degree Silicone Hose + 6 x Straight hose; 16 x Stainless Steel T-Clamps
34
Image

Product Highlights

  • Package including: 1 x Intercooler, 1 x Universal turbo intercooler piping kit, 1 x Type-S Blow Off Valve (Random color), 1 x 35/38MM Wastegate(Random color), 1 x Turbo Boost Gauge, 1 x Turbo Boost Controller, 1 x Turbo Oil Return / Feeding Line Kit, 5 Blot Turbo Downpie
  • 1 x T3/T4 Hybrid Turbo Charger: 25 PSI, and 500+HP on B series swaps, standard t3/t4 flange, perfect for any 4-6 cylinder applications. Power performance output capability = 25-35 psi. CNC machined flanges.
  • Turbo Specification: Inlet Diameter: 3", Outlet Diameter: 2", Oil Inlet: 1/8 NPT, Compressor Wheel: .55 Trim, A/R Compressor: .50 A/R, A/R Turbine: .63 A/R
  • 5 Blot Turbo Downpie: 2.5" t3/t4 5-bolt stainless steel TIG welded downpipe. Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing. This provides a simple starter solution for connecting your turbo's exhaust to your existing exhaust system.
  • 1 x Turbo Boost Controller: CNC Billet Aluminum Manual Turbo Boost Controller. Adjustable boost knob increases horsepower and torque, depends on boost level. Allows adjustable boost PSI setting, can be easily mount under the hood. PSI Level: Up To 30 PSi Boost
35
Image

Product Highlights

  • ▶ Fitment: Compatible with 1999~2002 Dodge RAM 2500/3500 5.9L(except 2001 Dodge Ram 2500 Base Extended Cab Pickup 2-Door 5.9L)
  • ▶ Turbo Model: HX35W;Horsepower: Up to 270hp;Flange: Standard T3; Wastegate/Actuator: YES; Exhaust Outlet/Inlet: 4"
  • ▶ Manufacturer Part Number: 3592766;Interchange Part Number: 3592767, 3800799, 3592766, 3800797, 3590104.
  • ▶ Gross Weight: 7kg (15.4lbs); Exhaust pipe diameter:102mm (4")
  • ▶ Turbocharger significantly increases engine horsepower; increases engine power and torque output; maintains combustion chamber pressure and fuel/air load
36
Image

Product Highlights

  • 【Compatible with】This intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line.
  • 【Function】Reducing the heat load of the engine caused by supercharging, therefore increase in horse power and turbo response,and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project.
  • 【Material】Made of high quality material,stainless tubular construction,forms a protective oxide layer on metals (especially aluminum) under electrolytic processes , so it can resist wear , rust and corrosion for extra durability.
  • 【Easy Installation】Manufactured to precise dimension requirements for perfect fit; designed for vehicles with limited space,easy slip-on; complete pipe kit with related hardware,easy to install and save time
  • 【Package Included】2Pcs 2.5" Straight Pipes; 2Pcs 2.5" 45 Degree Pipe; 2Pcs 2.5" 90 Degree Pipes; 2Pcs 2.5" 180 Degree U Pipes; 2Pcs 2.5" 90 Degree Elbow Hose; 6PCS 2.5" Straight hose; 16Pcs 2.5" Stainless Steel T-Clamps.
37
Image

Product Highlights

  • High Strength Cast Body; 50mm Stainless Steel Valve
  • Fits any 50mm Standard V-Band Wastegate Port; Anodized Aluminum Top Finish
  • Weldable Flange V-Band Flange for Manifold Downpipe (Fits 2" OD pipes)
  • Barbed Fittings; 14 PSI Spring Included
  • Stainless Steel V-Band Flanges and Sealing Rings; Easy to Remove Locking Bolts for Fast Spring Changes
38
Image

Product Highlights

  • Size: 45 degree, 102mm(4") OD , 150mm(6") Leg Length, 1.5mm Thickness
  • Real Japan Toray carbon fiber / fibre intake elbow exhaust pipe 45 degree
  • Generally a weight saving between 2 and 2.5 times lighter than the equivalent aluminium tube can be expected. (Approx. 1000g Aluminium Tubing = 400g Carbon Fiber Tubing)
  • Filament wound to the most common carbon fiber class of 3K weave. Carbon fiber tube, carbon fiber tubing, carbon fibre elbow pipe 45 Deg hose joiners
  • Roll Wrapped Carbon Fiber/ Fibre Tubing is high in strength and stiffness, and is inherently lighter than metal tubing. This form of tubing is commonly used in all industries from motorsports to robotics. Gross finish, grossy surface
39
Image

Product Highlights

  • UPGR8 polished aluminum pipe is great for DIY project like custom made turbo pipe, intercooler pipe and air intake pipe
  • Thickness: 2.0MM.
  • Applications: Universal Fit.(This is NOT bolt on pipe,it is for custom made project.Modification is required depending on setup).
40
Image

Product Highlights

  • This 2.5’’ intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line.
  • Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping.
  • Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention.
  • Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
  • Package Include: 2x Straight Anodized Aluminum Pipe; 6x 90 Degree Mandrel Bent Long Aluminum Pipe; 4x 135 Degree Mandrel Bent Short Aluminum Pipe; 8x Straight Silicone Couplers; 4x Elbow Silicone Couplers; 24x Stainless Steel T Bolt Clamps
41
Image

Product Highlights

  • Rust-resistant for long-lasting performance
  • A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards
  • Comes with two flange bolts and one flange gasket per side for ease of installation
  • OE#: F4TZ6K854C, F4TZ6K854F, F81Z6K854EA, F81Z6K854FA, F81Z6N632AA, F8TZ6K854AA
  • Replacement For Ford F-350 Super Duty 7.3L-V8 1999.5-2003
42
Image

Product Highlights

  • STRONG CAST TURBO MANFOLD with T4 FLANGE
  • T4 CAST MANIFOLD FOR PASS. SIDE ON ALL LS/VORTEC MOTORS..
  • AMAZING STYLE with EXTRA THICK HEAD FLANGE
43
Image

Product Highlights

  • Universal fitment with four mounting points
  • Overall Size: 31” x 11.75” x 3” / Core Size: 23.5” x 11.75” x 3”
  • Inlet & Outlet: 3” / Tank Wall Thickness: 5mm / Max PSI: 32
  • Robust, one-piece cast aluminum end tanks withstand high boost pressures
  • Four threaded universal mounting points
  • Tank wall thickness: 5mm
  • Fin pitch: 15 fins/inch
  • The maximum recommended psi: 32
  • Inlet/outlet: 3 inch

"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates". AS AN AMAZON ASSOCIATE, WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES.

JUMP TO [Show]