Best Shotgun Scope Mount for 2025

By Customer Ratings

1
Image

Product Highlights

  • Get a high series of mounts for scopes and optics
  • Mounts available in slimmer body with a quick mechanism
  • Raise your optic to next level with mount series

2
Image

Product Highlights

  • Highly visible 35MOA circle reticle dot for quick action shooting
  • Easy to install saddle scope mount with multiple ring slots
  • Side walls of the mount have slot cuts to reduce weight
3
Image

Product Highlights

  • COMPATIBLE: Stabilizer Mount for 5.0, 5.0 WIDE, 4.0 and Solo
  • EFFICIENT MOUNTING: Mounts your Tactacam Camera to your bow in a jiffy. It's a simple process. Just attach and viola!
  • EASY AS PIE: Locks in place with the touch of a button. No tough instruction or anything strenuous.
  • CAPTURE THE MOMENT: With this awesome mount yo can capture your next hunting adventure with ease. It can also be used as another mount for tactical selfie camera.
  • PERFECTLY DESIGNED: Designed for rifles, muzzleloaders, shotguns, or crossbows.
4
Image

Product Highlights

  • High quality steel material, different from other cheap counterfeit.
  • Mounts to all 1-Inch tube.
  • Dual 1 inch rings design make this mount suitable for most combat situation
5
Image

Product Highlights

  • 1-Inch Flashlight or Laser Mount
  • Mounts to a 1-Inch scope tube or 12 Gauge magazine tube
  • Dual Rings design make this mount suitable for most combat situation
  • Work on Savage Tactical 12
  • Diameter: both 25.4mm (one inch)ring ,Length: 90 mm (3.5 inch) ,Weight (net): 45g (1.6 ounce)
6
Image

Product Highlights

  • ✪✪ 2 Pcs Weaver style 30mm to 25.4mm scope adapter
  • ✪✪ 4 slots picatinny weaver rail for backup Second Laser, sight or light flashlight
  • ✪✪ with double allen head screws on both sides makes this mount very secure for any scope
7
Image

Product Highlights

  • Adjustability: Adjusted according to the size of the aperture of the barrel, adjustable screws. Fits tube from 12mm-20mm diameter
  • Two-Piece Design:Smart 2-piece design for clamping rifle barrel
  • The lightweight Single Rail Barrel Mount is easy to install without any gunsmithing.
  • Multifunction:Designed to mount flashlight, laser, and bipod on hand pistols, rifles and shotgun
  • Easy to Install: Easily to attach tactical laser sight or flashlight.
8
Image

Product Highlights

  • Compatible with most 9mm - 11mm, flat or rounded, airgun/shotgun dovetail rails
  • Recoil resistant Stop pin aids in additional zero retention against bidirectional recoil force typical of spring Operated airguns
  • Precision Machined from aircraft grade aluminum and finished in a matte black hard coat anodize
  • Sport type: Paintball
9
Image

Product Highlights

  • Precision Machined Out of Premium 6061 Aircraft Aluminum
  • Single Weaver-style 1 inch scope adapter
  • Lets you mount such accessories as red dot sight, laser, or flashlight
  • 4 slots picatinny/weaver rail for scope/laser sight/flashlight
10
Image

Product Highlights

  • Single Weaver style 30mm to 25.4mm scope adapter
  • 5 slots picatinny/weaver rail for backup/Second Laser, sight or light
  • double allen head screws on both sides makes this mount very secure
  • Standard with four sided hexbolts for maximum hold under extreme conditions and automatic weapons fire
11
Image

Product Highlights

  • Solid locking features
  • Low profile with see-through construction
  • T6061 aluminum alloy
  • Rigorously field tested for performance
12
Image

Product Highlights

  • Top rail allows for scope, sight, flashlight, laser installation.
  • Constructed of metal material, extra strong shock
  • Perfect for hunting, airsoft, war game.
  • Easy to install, fits 8mm rails.
  • Absorption capacity.
13
Image

Product Highlights

  • Fits on all round barrel type firearms; Ideally suited for 12, 16, 20, 28 gauge shotguns and all kinds of rifles
  • Makes it easy to mount Beamshot laser sights, tactical flashlights and other types of accessories on your firearms
  • Package List:2x Metal Clip,2 x Allen Key
  • Designed to install a torch or laser onto the rifle/ shotgun ,it is a Mechanical damping clamp
  • Upper clamp / ring adjustable from 11mm to 22mm,Lower clamp / ring adjustable from 13mm - 25mm
14
Image

Product Highlights

  • EASY USE: Simply attach the Tactacam to your bow, crossbow, gun or scope. Push the power on the auto record button to start recording. Push the button again when you want to stop recording.
  • COMPATIBILITY: Tactacam SOLO WiFi is compatible with the Tactacam App which allows you to connect to your camera from your smartphone to turn it on and off, view photos and videos and transfer them to your device for easy sharing with your friends or on social media.
  • HIGH QUALITY LENS: This small hunting video camera was built with an ultra high-quality lens and low light sensor.
  • 3x ZOOM LENS: 20-yard shots no longer look like a 100 yard shot thanks to the cameras 3x zoom lens.
  • ITEM INCLUDES: Tactacam Solo Wifi hunting action camera, Solo Battery,USB Cable with Charging Wall Adapter, Tactacam decal, Flat Black Stabilizer 32mm, Custom Gun Mount, and Under Scope Rail Mount.
15
Image

Product Highlights

  • 【Caution】: Avoid the eyes to be exposed to the beam directly
  • 【Advantages】: Comes with a cable pressure switch to easily control laser on and off; Complementary 1" barrel/scope clamp mount and gun mount to make this laser compatible with any 20mm width weaver base. Waterproof design works well in any weather conditions.
  • 【Bright】: 532nm wavelength green laser contribute to a super sharp and bright green laser sight, providing unparalleled clarity for the naked eye. Highly visible green laser in any environments with improved accuracy, reaches up to 100 yards during the day and up to 400 yards at night.
  • 【Application】: Perfect for novice shooters as well as professionals, our laser scope is a must-have for anyone with a shotgun and can be used regardless of plinking or shooting competitively.
  • 【Quality】: Made of aerospace grade aluminum with anodized finish. Using high quality laser module with qualified electronic components to support longer and consistent lifetime.
16
Image

Product Highlights

  • Raise flat rail line or sight by 1 inch
  • 5.7" in length (14 slots), sufficient for mounting most optics and lights
  • See-thru design, allowing for using optics and iron sights at the same time
  • Easy fitting and removal with large thumb wheels (no tools needed)
  • Fits picatinny / Weaver Rails
17
Image

Product Highlights

  • Fast shipping anywhere in USA.
  • A light weight low profile scope base rail for H&R1871 Pardner pump shotgun.
  • The rail has 14 ring slots which make it easier to set up eye relief and find more desired placement of scopes or red dot sights on top of the receiver.
  • Durable aluminum.
  • Mounting screws are included with the unit.
18
Image

Product Highlights

  • DURABILITY, made of aerospace grade aluminum, our laser sight features 532 nm wavelength, works well in any weather conditions
  • POWERFUL GREEN LASER, highly visible green laser in any environments with improved accuracy, reaches up to 100 to 300 ft. during the day and up to 1000 ft. at night
  • CONVENIENCE & COMPATIBILITY, comes with a remote control to easily switch laser on and off; complementary 1" barrel clamp mount and figure 8 mount to make this laser compatible with any 20mm width weaver rail base
  • UPGRADED OPTICS contribute to a super sharp and bright green laser sight, providing unparalleled clarity for the naked eye
  • PERFECT for novice shooters as well as professionals, our laser scope is a must-have for anyone with a gun and can be used regardless of plinking or shooting competitively
19
Image

Product Highlights

  • Tubeless design with 42mm reflex lens aperture provides quick target acquisition, also a wider field of view to maintain situational awarenes.
  • 4 Selectable reticles and 5 brightness settings. Low power consumption for long battery life.
  • Integrated mount for standard 20mm Picatinny or Weaver rails which will not loose, made to last.
  • Parallax corrected & unlimited eye-relief. Fully adjustable height, brightness, windage and elevation. Where the dot goes, so does the bullet!
  • Made of high grade aluminum alloy which makes the red dot sight durable and light weight.
20
Image

Product Highlights

  • Precision Machined Out of Premium 6061 Aircraft Aluminum
  • Single Weaver-style 1 inch scope adapter
  • See Through Design
  • Weighs 0.9 ounces
  • 5 slots picatinny/weaver rail for backup/Second Laser, sight or light
21
Image

Product Highlights

  • Compatible with TRUGLO TRU-TEC Micro, Vortex Venom, Burris Fastfire, EOTech MRDS, Meopta Meosight series, and Docter optics and other compatible mounting systems
  • Mount a dot-optic to your shotgun's ventilated rib; Fits ventilated ribs, . 236 in. (6mm) to . 395 in. (10mm) rib widths
  • Optic stays with the barrel and maintains zero when changing barrels for different seasons
  • Mounting hardware and tools included
  • Rigid two-clamp mounting system; Allows optic to sit low on the rib
22
Image

Product Highlights

  • ✌ Precision Material - Premium out of aircraft grade aluminum alloy and black hard coat anodize finish, sturdy & durable.
  • ✌ Convert 11mm Dovetail to 21mm Picatinny Rail - 2.94 inches length at the base, the picatinny rail extends 3.94 inches allowing for more flexible optics placement.
  • ✌ Mount Base - Fit 11mm dovetail mounts, Base mount 3/8" to 7/8" converter adapter. Low profile 0.59" riser rail for scope.
  • ✌ Top With 9 Slots Weaver Style Rail - Top 21mm picatinny rail allows for the mounting of picatinny or weaver standard scopes, red dots or other accessories.
  • ✌ Easy To Install - Rail adaptor installs easily via dovetail mount and one vertical stop pin, attached allen wrench can help you to tight stable and no shaking.
23
Image

Product Highlights

  • Compact 500 lumen Tactical Pistol Flashlight, very bright at 40 to 50 yards
  • The Flashlight has 3 modes: Normal brightness, High brightness, Strobe.
  • The red laser has 20mm rail on its top and 20mm rail mount on its buttom, very easy to mount on weapon and get other optics be mounted on it.
  • The flashlight power by 1x CR2 battery (Included), the red laser power by 2 x LR44 batteries (Include)
  • Laser Class:Class IIIA Power:≤5mW
24
Image

Product Highlights

  • Machined from extruded aluminum alloy
  • 14 ring slots for more choices of sight placement and easier eye relief setup
  • Compatible with both Picatinny and weaver rings and mounts
  • Low profile lightweight design
  • Works with red dot sights with Picatinny mounts
25
Image

Product Highlights

  • Highly Visible Red & Green 4 Different styles Reticles.
  • Coated glass for best possible sight picture and lens durability.
  • Kit includes:Aluminum Light Weight scope mount and 1x30 combat reflex sight.
  • A super lightweight aiming solution for your Mossberg 500 High strength Aluminum housing is soft coated in flat black color. This sight provides optimum performance under most everyday sport shooting conditions.
26
Image

Product Highlights

  • ☞Multi-Reticles☜ Both red and green in one sight with 4 different pattern reticles. The new designed push-button makes pattern color switch and brightness adjustment easier.
  • ☞Wider View☜ Tubeless design with 40mm reflex lens aperture provides quick target acquisition,also a wider field of view to maintain situational awareness.
  • ☞Sturdy Mount☜ Integrated mount for standard 20mm Picatinny or Weaver rails which will not loose, made to last. Also come with 45 degree rail mount to provide an extra rail position.
  • ☞More Accurate☜ Parallax corrected & unlimited eye-relief. Fully adjustable height, brightness, windage and elevation. Where the dot goes, so does the bullet!
  • ☞Durable☜ Made of high grade aluminum alloy which makes the dot sight durable and light weight.
27
Image

Product Highlights

  • Fit for 1" Scope Tubes / Barrel / Mag. tube Very Well, Such as Remington, Mossberg 500, 835, Maverick 88, Winchester 1300, Browning ..... include Rib Shotgun barrel ......
  • ATTENTION : make sure the diameter of scope tube / barrel / shotgun Magazine Tube is 1".
  • 9 slots, 95mm/ 4" length, Just 2 screws tighten / mounted on tube at Any Angle for Laser or Small Accessory Attached on scope tube, shot gun Barrel or Mag. tube
  • Precision Machined Out of Premium 6061 Aircraft Aluminum; Black Hard Anodized Finish
  • If Tube Diameter less than 1", the spacer should be need to fill in , confirm up to exactly 1" Dia. for fit well !!!
28
Image

Product Highlights

  • Fits 12GA Shotgun. Front bolt size Ø: 0.18 inch; Rear bolt size Ø: 0.24 inch.
29
Image

Product Highlights

  • Great for slug shooting or turkey hunting or tactical shotgun use
  • Easy to install in existing pin ports on the receiver – no gunsmithing or special tools required
  • Solid one piece design of saddle style that straddles both sides of receiver
  • Top Picatinny rail is 6inch long and has 14 ring slots for proper scope or red dot sight placement
  • Machined aluminum alloy body in anodized non glare matte finish
30
Image

Product Highlights

  • Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics.
  • Measures 5.5 inches long, easy to install design; It is a tactical, low profile top rail mount accessories.
  • Picatinny rail mount for Mossberg 500 and 590 Series and equivalent shotguns.
  • Installs via included set screws into the Mossberg factory mounting holes.
  • 13 rail slots for flexible eye relief adjustments and all scope applications.
31
Image

Product Highlights

  • Great for slug shooting or turkey hunting or tactical shotgun use
  • Easy to install in existing pin ports on the receiver – no gunsmithing or special tools required
  • Solid one piece design of saddle style that straddles both sides of receiver
  • Top Picatinny rail is 6inch long and has 14 ring slots for proper scope or red dot sight placement
  • Fit both 12gauge and 20gauge models and both right and left hand models
33
Image

Product Highlights

  • Combo of Scope Mount Kit, 1 Inch Machine Low Profile Rifle Sight Rings for Picatinny / Rail Style Weaving with Mossberg 500/590 Series Tactical Shotgun Picatinny Rail Mount
  • Magnification: 4x; lens diameter: 1260 in; eye relief: 3300mm; length: 7.480 in.
  • Scope Ring: 1 inch lightweight, precision machined from aircraft grade aluminum alloy with anodized matte black finish.
  • SCOPE RAIL - Picatinny Rail Mount for Mossberg 500 and 590 Series and Equivalent Shotguns
  • Scope - inert gas purged, fog, shock, waterproof, this scope can be used under all weather conditions.
34
Image

Product Highlights

  • GOTICAL Machine 1" Low Profile Rifle Scope Rings for Picatinny/Weaver Rail with Mossberg 500/590 Series Tactical Shotgun Picatinny Rail Mount (Pack of 2)
  • Rings for Picatinny/Weaver Rail with Mossberg
  • 500/590 Series Tactical Shotgun Picatinny Rail Mount
  • Easy installation Connects at the top of receiver
  • Easy to install|Anodized black finish
35
Image

Product Highlights

  • Fits Mossberg 500 and Maverick 88 Perfectly
  • Installs using existing ports
  • Great for slug shooting or turkey hunting or tactical shotgun use.
  • Perfectly contours to match receiver
  • Easy Installation / No gunsmith required for Installation
36
Image

Product Highlights

  • Fits 20GA Shotgun. Front bolt size Ø: 0.18 inch; Rear bolt size Ø: 0.24 inch.
  • Lower weight design with Skeleton slotted side walls.
  • Provides eye relief adjustments for scopes and red dot sights.
  • One piece mount is made of high quality aluminum alloy.
  • Easy to install in existing pin ports on the receiver.
37
Image

Product Highlights

  • IPROTEC gun lights, lasers, scopes and accessories: Expertly designed and meticulously crafted with the latest firearm technology, all iProtec products are compact, easy to handle and lightweight
  • The iProtec Universal Long Gun Mount with Accessory Rail System is a self-locking mount using an adjustable mount design to easily mount and lock to your long gun, no tools required
  • Adjusts to fit shotguns, all rifles and most scopes - clamp offers a 12. 5 millimeter adjustment allowance while the barrel and flashlight portion of the clamp adjusts 20mm to 32. 5mm
  • Side of the gun mount has an accessory rail mount to attach additional firearm accessories
  • Constructed of aircraft-grade anodized aluminum, this gun mount is tough and built to last
38
Image

Product Highlights

  • Fits 870, 12Ga Shotgun
  • Lower weight design with Skeleton slotted side walls
  • 14 slots provide eye relief adjustments for scopes and red dot sights
  • One piece mount is made of high quality aluminum alloy
  • Package includes: Mount, Reflex sight.
39
Image

Product Highlights

  • Skeleton slotted side walls to reduce weight
  • One piece saddle design made of solid aluminum alloy
  • Up-to-date top Picatinny rail allows more options of optics placement
  • There is see-thru tunnel underneath top rail that allows use of front bead sight if available
  • Quick and easy to install. No gunsmith needed
40
Image

Product Highlights

  • Fits 12GA Shotgun. Front bolt size Ø: 0.18 inch; Rear bolt size Ø: 0.24 inch.
  • Lower weight design with Skeleton slotted side walls.
  • 14 slots provide eye relief adjustments for scopes and red dot sights.
  • One piece mount is made of high quality aluminum alloy.
  • Quick and easy to install.
41
Image

Product Highlights

  • ShotGun Mount for GoPro
  • Fixed mount will not move during recoil!!! Always parallel to barrel!
  • Compatible with all GoPro Cameras Hero 1,2,3,3+,4, 5,6 and 7 including the session 4 and 5.
  • Works with the Frame or the Waterproof housing. Low Profile does not obstruct aiming view
  • Compatible with Shotguns, Rifles, Paintball Guns (any Gage any Caliber)
42
Image

Product Highlights

  • Picatinny rail mount for Mossberg 500 and 590 Series and equivalent shotguns
  • Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics
  • Installs via included set screws into the Mossberg factory mounting holes
  • Crafted from lightweight aluminum, 5.4 inches in length and 1.4 ounces in weight
43
Image

Product Highlights

  • 【Flexible Size】 Durable Quick Release Mount Fit for 15~35 mm diameter barrel.
  • 【Widely Usage】Good for Rifle, Shotgun, Paintballgun, Airsoft, Crossbows, Torches, Flashlight, Telescopes, Sights ,Bicycles, Hunting accessories and more.
  • 【High quality Material】This gun/airsoft rifles scope mount uses multiple stamping bending forming processes, quality steel surfaces after polishing treatment, electrophoresis with Matt Black on the surface.
  • 【Easy Use】The scope riser mount is convenient and easier install and remove with big screew bar and easy-to-rotate knobs.
  • 【Friendly Protect】Anti-vibration design ,build in sponge for protect your barrel for scratch.
44
Image

Product Highlights

  • Full-length
  • Allows for proper eye relief
  • Fits Mossberg Maverick 88 12-gauge
  • Includes ring
  • Shotgun Saddle mount, constructed of Aircraft Aluminum
  • Multiple cross slots provide eye relief adjustments
  • No-Mar design will not scratch or mar shotguns
45
Image

Product Highlights

  • Full-length
  • Allows for proper eye relief
  • Fits Remington 1100/1187, 12/20 gauge
  • Shotgun Saddle mount, constructed of Aircraft Aluminum
  • Multiple cross slots provide eye relief adjustments
  • No-Mar design will not scratch or mar shotguns
46
Image

Product Highlights

  • Hunting scopes mounts
  • Weaver Shotgun "No Gunsmithing Converta Mount
  • Multi slot base allows you to mount a variety of optics including scopes, red dots, lasers while obtaining the optimum eye relief
  • Low profile, form fitting design allows you to shoot in your natural position without "peeking"
  • Strong and lightweight
  • Made of tough polymer composite material that will operate in temperatures of -40F to 150F
47
Image

Product Highlights

  • High strength aircraft aluminum alloy with Anodized Black Matte Finish.
  • The solid hollow structure design utility model has simple and compact whole structure which conforms to principle of mechanics, solidly.
  • Attach flashlights other different accessories.
  • Perfect for 25.4/30mm tubes. Lightweight, mounts light or laser scope sight. securely.
  • Package Included: 1x30mm NcDe Tactical Barrel Mount, 2x Gaskets(fit for 25.4mm), 1x Hex wrench
48
Image

Product Highlights

  • Precision machined out of premium 6061 aircraft aluminum
  • Double allen head screws on both sides makes this mount very secure
  • 4 slots picatinny rail for backup/second Laser, sight or light, perfect on the s-hell tube
  • This mount has made it easy and quick to attach different accessories.
  • Fits R-emington 870 1100 11-87 SP-10 M-ossberg 500 835 M-averick 88W-inchetser 1300
49
Image

Product Highlights

  • Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics.
  • Measures 5.5 inches long, easy to install design; It is a tactical, low profile top rail mount accessories.
  • Picatinny rail mount for Mossberg 500 and 590 Series and equivalent shotguns.
  • Installs via included set screws into the Mossberg factory mounting holes.
  • 13 rail slots for flexible eye relief adjustments and all scope applications.
50
Image

Product Highlights

  • The Flashlight Mount Holder fits for Multiple Scope Size 1"-30mm.Also Working Universally for Any Range 20-50mm Diameter Tube.
  • The scope mount Working with Flashlights/ Torches / Telescope Sights(Particularly suitable for HS-802 hunting flashlight).Wide range of uses, ideal for hunting.
  • Very versatile mount that accommodates different diameter and lights at the same time.
  • Hole size --- 25mm ~ 30mm | Weight --- 85g/ 3oz. Material --- Hight quality plastic.
  • Easy on and off. Does not scratch the scope. Attaching a flashlight to your night vision scope.
51
Image

Product Highlights

  • Made of the highest quality materials
  • Hunting scopes mounts
  • Another quality Bushnell product
  • Weaver Shotgun "No Gunsmithing Converta Mount
  • Multi slot base allows you to mount a variety of optics including scopes, red dots, lasers while obtaining the optimum eye relief
  • Low profile, form fitting design allows you to shoot in your natural position without "peeking"
  • Strong and lightweight
  • Made of tough polymer composite material that will operate in temperatures of -40F to 150F

"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates". AS AN AMAZON ASSOCIATE, WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES.

JUMP TO [Show]