Hardened steel construction: This roll pin punch set is made of highly quality hardened steel, drop forged, heat treated & knurled steel for extreme durability, work ability.
Great Handle: The knurled handles are deeply cut and let you get a good handle on it while striking with a hammer.
Safe hemispherical recessed roll pins:Hemispherical recessed tips to cradle the roll pin, so it won't cause scratches or damage to your firearm.
Full set roll pin punch: 9pcs different size including 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"punch size, this roll pin punch set kit is perfect tool for gunsmith, jewelers, watchmakers, engineers, carpenters - use on Machinery, Vehicles, Woodwork and Crafts.
Fitted nylon storage pouch: This 9pcs roll pin punch set tool kit come with red carrying case, easy to use, carry, storage or hang this tool set. It comes with a hammer.
Glock Tool Kit: 1*Mag Disassembly Tool, 1* Pin Punch Tool, 1*Glock Front Sight 3/16" Tool. Compatible with Glock 19 43 26 27 Models. A Must Have for Glock Owners.
Magazine Disassembly Tool: The easiest and fastest way to remove mag base plates from your glock models without any damage, compatible with all glock models except for Glock 30 round magazines or extended base plates.
Front Sight Removal Tool: Hardened 3/16’’ hex thin wall nut driver to install and remove the front sights on Glock models without slipping.
Pin Punch Tools: A disassembly tool for removing all pins on Glock models, there is no sharp edge on the tip so it will not scratch your gun compared to normal punches.
Full Customer Satisfaction: If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction.
CHICAGO SCREWS – The best choice when it comes to DIY Kydex and Leather Holsters, Knife Sheaths, Belt Clips, or any other piece of tactical gear. Each pack includes 12 Phillips Truss Heads, 12 Open Slotted Post Fasteners, and 12 Rubber Washers/Spacers
EASY TO TIGHTEN – The open slotted fasteners are ideal because they allow for a tighter and more secure connection than non-slotted fasteners
STRONG & DURABLE – Each piece of hardware is made of high carbon steel and coated with a high tech black thermochemical treating to harden it and give it a gun-like matte finish that eliminates any glare. The included washers are resistant to liquids and oils and are able to withstand extreme temperatures.
DIMENSIONS – Phillips Screw Heads have a 3/8” outside diameter and 1/4" long threaded section with an 8-32 thread, Slotted Post Fasteners have a 7/16” outside diameter and 1/4" long threaded section, Rubber Washers have a 1/2" outside diameter
100% SATISFACTION GUARANTEED – We take great pride in our products and make sure that the highest quality standards are met by sending each product through a rigorous inspection procedure. We are confident that you will be happy with your purchase and we stand by our product. In the extremely unlikely occurrence that you are not fully satisfied with the product, we offer a 100% money back guarantee
Magnification: 1x; Obj. aperture: 33mm; Power of the red laser:2mW; Class of the laser: ClassIIIA.
4 Reticle Dot Sight Red and Green Illuminated with Adjustable Brightness Control.Built-in Mount (Integrated rail) for Standard 20mm Bases.
Coming with The Switch Button and The Pressure Pad Switch, You Can Choose One of Them Towards Different Situation.
Tubeless Design with 33mm Reflex Lens Aperture Provides A Wide Field Of View, Suitable For Rapid-firing or Shooting Of Moving Targets Besides Normal Shooting.
Very Light Weight and 100% Waterproof, Fogproof and Shockproof.Low Power Consumption For Long Battery Life.
【Advantages】Unlike similar products on the market, our bench block has made two improvements. 1. Special surface treatment to protect your precious firearm from scratches during gun drifting and staking. 2. This bench block comes with a non-slip mat(4" diameter) to avoid slippage during use, convenient for you to use effectively.
【High Quality】1 1/4" H x 4" diameter work surface. Made from engineering-grade nylon, non-marring work surface to avoid the damage of your gun parts, durable in use.
【Multifunction】It is a great application for disassembling and reassembling handguns. Perfect for 1911s as well as other firearms, such as 10/22s, etc.
【Application & Use】The main spring removal groove; the front sight staking groove; 1911 barrel bushing tool; the rear sight drifting channel; the barrel link pin removal "V" channel; the hammer and sear pin removal holes; the slide rail dressing round bottom channel; ejector port dressing channel. Highly useful for gunsmithing.
If you have any questions or difficulties, please contact us, we'll be glad to help you.
* Included is a fully machined replacement slide cover plate that is drilled and tapped for attaching the Clip.Perfectly suitable for glock19, 23, 26 accessories
* The replacement cover plate can be left in place indefinitely, with or without the Clip draw attached.
* Extra screws and lock washers are included. Low Profile Slim Concealed Carry Easy Install.Perfectly suitable for Glock 19, 23, 26 ,17,22 23 24 25 26 27 28 30S 31 32 33 34 35 36 Carry Pistol Clip
* The TGIC powder coating prevents abrasion by providing a thin but highly durable polymer cushion between the Clip and the slide.
* GOOD FIT – Strong, Secure, Comfortable, and easy to wear with most pants; Snug Fit Reposition to whatever angle works best; Grab and clip it on as you walk out the door
Adapts a Beavertail to your Gloc as mentioned on title
Allows shooters a higher for better control.
GEN 123 ADAPTERS FIT STANDARD & COMPACT GLOCK FRAMES GEN 1, GEN 2, AND GEN 3 SERIES MODELS: 17, 19, 22, 23, 24, 31, 32, 34, 35, 37, 38 ONLY AVAILABLE IN BLACK GEN 123 ADAPTER was developed specifically for GLOCK's GEN 1, GEN 2, and GEN 3 series of pistols. It eliminates the drawbacks associated with permanent modifications to your factory pistol. GEN 123 ADAPTER mates completely to the back strap of the GLOCK frame, permitting the shooter's hand to conform to the frame in a more secure manner.
This offers more control and allows the shooter to index the pistol on target more efficiently. *In 2007 and later, GLOCK produced some pistols (in 9mm and .40 caliber), that have slightly thicker frames than most other GEN 3 pistols.
These frames, which have a serial number prefix starting with the letter L (i.e. LXX123), are oversized in diameter at the trigger housing pin location. The GEN 123 ADAPTER will not fit on these oversized frames and cannot be secured using our extended retention pin.
Fits Mid and full size Generation 4/5 Models 17, 18, 19, 22, 23, 24, 31, 32, 34, 35, 37 ,38,44(NOT FITS Models 20 21 Gen4 and 20SF 21SF). Note: You can not use the additional backstraps when the plug is installed.
Protects your pistols internal parts from dust/ dirt/Debris/ rain/ snow/ lint etc.
Engineered for speed, beveled for fast reloads. Aid in guiding the magazine fast into the magazine well.
Flush fit to eliminate the possibility of snagging on the open cavity.
Use safety packaging to prevent being crushed by heavy objects during transportation.
Material Polymer - Designed for Mid and Full size Generation 1, 2, 3 Glocks.
Fits Models G17, G18, G19, G21, G22
Easy Quick Simple Install. Helps guide magazine into mag well.
Protects from dust, dirt, debris, rain, snow.
A perfect flush fit, prevents snagging.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates". AS AN AMAZON ASSOCIATE, WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES.
