Best Car Front Bumper Guard for 2024

By Customer Ratings

1
Image

Product Highlights

  • The installation process is easy and takes only minutes
  • Made of steel tubing with a powder coat finish
  • The bumper guard is durable and long-lasting

2
Image

Product Highlights

  • Two pieces of bumper protector sticker decal.Condition: 100% Brand New w/ High Quality.
  • Material: premium quality black soft rubber.Strongly Wear And Pressure Resistance.
  • Place: rear corner bumper, rear trunk bumper.Universal curved shape design to fit around car bumper or body adjacent to the wheels. Suitable for most of the cars, SUV, pickup trucks. These protection strips are ideal automobile or motor vehicle such as car, truck, lorry, bus, van, rv, suv and so on.
  • Style: M Colored sport
  • Size: 15.7” x 1.57”
3
Image

Product Highlights

  • 🚗 Feature: The car door protector strips can against fire and water, it is resistant to abrasion, oil, and superior heat preservation, effectively guard your car against bumps and scratches damaging your vehicle's door, bumper, bodywork, and other places.
  • 🚙 Ultra Thickness: Compare to other brand product, our protector strips is 1.18-inch thickness, the service life of up to 5 years, can be better to provide full protection for your car, prevent damage caused by any moderate impacts.
  • 🚚 Premium Quality: Made of Eco-friendly high-quality EVA Foam with strong adhesion tape backing, durable and easy to clean, easier installation on almost all smooth surfaces including plaster, wood, metal, concrete, etc.
  • 🔨 Easy Installation: Just need to peel off the backing paper and stick it on the wall, 4 pcs guard strips are better for left and right side of the car, guard your car against bumps and scratches, it is suitable for DIY to multi shapes or size.
  • 🏡 Widely Use: This garage wall anti-scratch strip is perfectly used in parking spaces, warehouse, mechanical insulation, pipe insulation, vehicle collision avoidance. And removed without tearing the soft protector or leaving marks on the wall.
4
Image

Product Highlights

  • Well made engine splash shield bolts repair hardware kit, 8mm plastic rivets, and M6 u-nuts with bolts were used all over the place on many vehicles
  • This set of clips rivets are widely used to replace or repair fender bumper cover, front plastic fender wells, and adapt to engines front slash guard
  • Retainer Fastener Rivet Clips Compatible with Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (please check out the product description below for more details)
  • Package includes: 15 X Extruded U-nuts - Replace/Fix to the Bumper, 15 X Body Bolts with Built-in Fender Washer, 15 X Plastic Push Clips, 3 in 1 enclosed pack
  • Replacement: Designed to fit GRC-70 and replace your old OEM part, please keep in mind that this is an aftermarket part but much closer to the OEM at an affordable price
5
Image

Product Highlights

  • Fits 2016-2020 Toyota Tacoma
  • Requires trimming of factory bumper
  • High clearance design that accommodated factory TRD skid plate
  • 3/16″ Plate bumper and 1/4″ winch mount
  • 10,000 lbs winch capacity
6
Image

Product Highlights

  • 1.Ideal Choice - The car bumper guard protector works for universal car, such as suv, trucks, pickup. Warm Tips: Please check the picture 2nd about the size (35*10* 2cm/13.7* 3.93* 0.78inch) carefully before you order. Thickness: 0.78’’. Package includes 4pcs car bumper guards for cars.
  • 2. High Quality Material - Made for high quality rubber, the car bumper strip protector is attached with the strong adhesive. Note: Please clean the surface before using and press it for several minutes after heating, it will effectively extend the service life.
  • 3. Easy to Install - Avoid sticking to exposed environments, wipe the car in advance and keep it dry, otherwise it will fall off easily. Do not wash and wipe the car within 48 hours after installing. Otherwise, it will fall easily. You can stick the side bumper guards on any place of your car like the front bumper, rear bumper, door guard and corner.
  • 4. Unique Design - The rubber strips for car bumpers are flexible to install and avoid the car to wear and tear, scratches paint scratches, collision. Heat and cold resistance and waterproof. When removing the strips, it wouldn’t take pint off.
  • 5. Our Special Service - We strive to provide good service and shopping experience.Please trust us you are protected by special customer service from the ViCiCA store! If you're unhappy or any issue, please don't feel hesitate via Amazon to directly contact us. We will take care of you within 24 hours! BUY WITH CONFIDENCE!
7
Image

Product Highlights

  • Great Material: This rear bumper protector is made of high quality silicone polymer material, heat /cold resistance, abrasion resistance, anti-aging, waterproof & UV resistance. Hardness 60 (Shore A), High Elongation.
  • Multi-Function: The rear bumper guard effectively protect car rear bumper when loading or unloading luggages, groceries, tools box and so on, It prevents nasty scratches and provides protection. Also it can be used to cover any existing scratches, paint damage.
  • Unique Design: ANTI-SLIP DESIGN of this bumper guard, groove design and non-slip function, can effectively prevent the falling of things that you temporarily put.
  • Light Weight: This scratch-resistant rubber guard is very durable,flexible, and bendable (will not crack or break), glue tape is coming under the trim, just stick on sill, easy to install.
  • Satisfaction Guaranteed: Your purchase is fully protected when you order this rubber bumper protector today. If you have any problem, we will solve it within 24 hours.
8
Image

Product Highlights

  • All-round Protection: Made of durable impact-resistant silicone, provides shock absorption for all edges and especially corners, while maintaining a smooth, clean look.
  • Ergonomic Design: This case features built in padded handles at the back to make playing for long durations much more comfortable.
  • Kickstand Access & Precise Cutouts: Unique design ensures Nintendo Switch original built-in kickstand to be used at will for multi-viewing angles. Access to all the controls and features without taking your Switch out of the case.
  • Tyre pattern design not only prevents your Nintendo Switch from slipping, but also provides comfortable feeling for hands gripping.
  • Easy to Install: This case is made of a specially designed flexible silicone material which allows it to be easily taken off quickly whenever you need to dock.
9
Image

Product Highlights

  • Universal fit: this bumper guard fits any car small and large
  • Quality material: made of high density durable and all weather foam material that is only 1/4 of a inch thick and enough to protect your bumper from dings dents and scratches when you park the car
  • Easy handling: lightweight (only 1.5 lb.) this bumper guard can be installed in a breath
  • 360 degree protection: extra wide (72 inches) the bumper protector also curves around the corners
  • Secured in place: with the 2 Velcro straps the bumper security attaches right on the carpet of your trunk, and adjustable straps. Works the same with or without the side straps
10
Image

Product Highlights

  • 【High-quality rubber material】 The car bumper protection strip is made of high-quality rubber and is attached with a strong adhesive. Please clean the surface before use, press for a few minutes after heating, which can effectively extend the service life.
  • 【Easy to install】 Avoid sticking to exposed environments, wipe the car in advance and keep it dry, otherwise it will fall off easily. Do not wash and wipe the car within 48 hours after installing. Otherwise, it will fall easily. You can stick the side bumper guards on any place of your car like the front bumper, rear bumper, door guard and corner.
  • 【Perfect protection】 The rubber strips for car bumpers are flexible to install and avoid the car to wear and tear, scratches paint scratches, collision. Heat and cold resistance and waterproof. When removing the strips, it wouldn’t take pint off.
  • 【Scope of application】 The car bumper guard protector is suitable for general vehicles, such as suvs, trucks, and pickups. Before ordering, please carefully check the size of the product (27*3CM).
  • 【Package content】 4pcs Car Bumper Corner Rubber Strips. If you are not satisfied with our products, or have any questions, please feel free to contact us via Amazon email, and we will serve you within 24 hours.
11
Image

Product Highlights

  • 【Upgrade glue】This car bumper protector rubber uses upgraded double-sided 3M glue that won't fall easily and can be firmly adhered to your car.【Notice!】Clean the car surface before using the rubber strips, and the surface do not touch water within 24hrs after sticking for better product experience!
  • 【Comprehensive protection】This bumper guard strip can be glued to the front and rear bumpers and front and rear doors of the car. This bumper protector trim for car effectively protects your car from scratches and scratches.
  • 【Easy to install】 This universal bumper guard protector car can be used immediately after tearing off the protective film on the surface. The rubber strips for car bumper takes up a small space and can be easily stored. Product size: 10.7inch * 1.25inch
  • 【Soft material】 This car anti-collision strip is made of high quality soft material, which has good flexibility and durability without hurting the paint. This car bumper protector front and back can protect and decorate the car.
  • 【Compatible with multiple models】 The package includes 4 anti-collision bumper protector, and is suitable for various models of Sedan,SUV,MPV,Pickup,Truck. We provide one year of quality support for this front and rear bumper protector. If you have any questions, please feel free to contact us and we will solve the problem for you as soon as possible. Buy without risk !
12
Image

Product Highlights

  • Fits Club Car DS models, Gas & Electric 1981-Up.
  • High quality steel material with superior efficiency and durability.
  • Timeless fluid arch design,elegant black matte-finish coat,professional spray craft,well decorates your golf cart,protects the front.
  • Works with cut-in headlights,easy bolt-on installation.
  • BEST SERVICE:Factory direct pricing without middleman mark-ups.If you have any question, please feel free to contact us.
13
Image

Product Highlights

  • 【Quality Rubber Material 】Excellent wear resistance/effective against cold/heat/aging/UV/Functional effect It prevents nasty scratches and provides protection. Also it can be used to cover any existing scratches, paint damage.Decorative protection effect,What’s more, you can cut to the desired length to fit your different applications.
  • 【Installation location】Bright carbon fiber of decoration and anti-collision effect,Can be installed door sill position. Door side. Rear tail box. Tail box cover.Bumper.Rear view mirror. The rear bumper guard effectively protect car rear bumper when loading or unloading luggages,groceries, tools box and so on,Is a multi-purpose protection strip.
  • 【Protective effects】High-quality material protective layer, anti-scratch, protect the trunk door sill from scratchesBend freely. Front and Rear bumper guard anti-collision protective,Door Sill Scuff Pedal Protector Feature
  • 【Beautiful appearance】Good flexibility and perfect fit lines make the car more beautiful.Black Carbon Fiber Texture, Front and Rear bumper guard anti-collision protective.it can dramatically upgrade your exterior apperence
  • 【Arbitrary tailoring】The car protection strip can be freely deformed and freely cut.High grade anti-scrape rubber Carbon fiber surface oil is shiny and shiny is soft and strong.Carbon fiber will not wrinkle,wearproof, can be bent,last along service life,not easy to fall off, more durable and stable. easy to install.
14
Image

Product Highlights

  • At 14" EXTRA WIDE x 8.25" HEIGHT X 2" THICK - The BumpShox MAX is Designed To Be Taller and Wider Than a Standard License Plate Frame
  • TOUGHER THAN STEEL – V-Tech All Weather Foam ** Will NOT Crack or Rust Like Metal or Plastic License Plate Frames **
  • RECESSED SCREW DESIGN - No Protruding Metal Parts That Can Damage Another Vehicle's Bumper
  • STEALTH DESIGN - Steep Angles Gives the BumpShox A Sleek Appearance, Increases Product Flexibility and Maximizes Shock Absorption
  • FLEX-FIN EXTENDER - This Patent Pending Feature Provides Additional Coverage to Protect the Front Bumper From Dents and Scratches When a Taller Vehicles Backs Into Your Vehicle
15
Image

Product Highlights

  • Make your Club Car DS look menacing with these brush guards from KUAFU.
  • Fits the Following Cart(s): 1981-Up Club Car DS gas and electric golf carts.
  • Protects the front cowl while making it look rugged and has easy bolt-on installation.
  • Stylish rounded design goes with the contour of the body for a sporty look! Replaces your front bumper.
  • Buy with confidence,100% SATISFACTION GUARANTEE:We sure you will love our high quality products. However,if you are unsatisfied in either way,you have No-Questions-Asked, 30-DAY money-back guarantee.
16
Image

Product Highlights

  • MAXIMUM PROTECTION over 2” THICK, over 15” WIDE, & over 7” TALL
  • EXTRA WIDE VIEWING ANGLE = NO CITATIONS FOR OBSCURING PLATE
  • INNOVATIVE PATENT PENDING FLEXIBLE FRAME DESIGN PROTECTS YOUR VEHICLE AND YOUR LICENSE PLATE BETTER THAN EVER BEFORE POSSIBLE
  • DENSE ALL-WEATHER IMPACT ABSORBING FOAM WILL NEVER RUST OR
  • STAINLESS STEEL REINFORCED RIGIDITY
17
Image

Product Highlights

  • ★ Protects your car Bumper edge from scratches and abrasion.
  • ★ Pair of black Anti-collision Patch Bumper Bumper Protectors, Universal fit for most of cars.
  • ★ Comes with adhesive on the back. Easy Installation, durable, good flexibility, any shapes available.
  • ★ High-quality rubber materials. Cover existing scratches and prevents your car from wear and tear, scratches paint scratches ,etc.
  • ★ Elegant and dynamic design,match well with all kind of car. This goods can be installed in the front and rear of the car bumper. It process special coating, Protection for bumper corner, avoid scratch of the car.
18
Image

Product Highlights

  • Comprehensive protection for license plate: this rubber license plate frame protector is made of heavy-duty rubber material and with 2.3 inches thickness, can protect your car from bumper depression and scratches at rear-end collision or other accidents
  • More practical than steel: compared with steel bumper guard, the rubber guard is not easy to fray or rust, and won't cause hurt to your precious car, easier to assemble and safe to use
  • Bumper protector rubbers: this car bumper protector rubber uses quality double-sided glue that won't fall easily and it can be firmly adhered to your car
  • Universal fit for bumper guard for license plate: with stylish and universal design, this license plate bumper guard fits for any US "standard" license plate; Improve your front bumper protection with this jet-black license plate holder and bumper protector; It has great look and practical function
  • What you get: you will get 1 x license plate bumper guard, all hardware for installation, 2 x protector rubbers; If you have any other questions on this product, don't hesitate to contact us
19
Image

Product Highlights

  • WARNING: Intended to be used on parked vehicles ONLY. Never drive with the BumperButler attached; using the BumperButler while driving may leave scratches on your car's exterior.
  • Dimensions: 43 X 11 inches
  • Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Loose dirt can be shaken out or vacuumed, and hard soiled areas can be hosed down with water and allowed to dry
  • Patented, durable, and long-lasting rubber design; Fits most sedan vehicles. Strong security straps help deter theft and add extra sturdiness
  • High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations
  • Conforms to the vehicle’s unique contours and blends with its shape and does not detract from its stylish appearance

"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates". AS AN AMAZON ASSOCIATE, WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES.

JUMP TO [Show]