Best Auto Bed Leveling for 2025

By Customer Ratings

1
Image

Product Highlights

  • East to install and use kit for 3D printers
  • Consumes less power than other competitors
  • Simple structure and high precision

2
Image

Product Highlights

  • This BL Touch kits just works for Creality CR-10 V2 3D Printer.
  • It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • Self-test : The push pin operate two times in a test when the power is on.The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
  • Easy Firmware Installation: Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official website, directly insert TF/SD card and the power cord,then press the switch.Wait a few seconds for the firmware to install. (Note:If you don’t have the driver, you can download it from the Creality official website.)
3
Image

Product Highlights

  • 【High-performance kit】Automatic bed leveling kit, can easily realize automatic bed leveling,bl touch sensor can be perfectly applied to any surface,can automatically adjust the plane,metal/wood/glass/etc.
  • 【High precision】The accuracy difference of the table is very small, about 0.005mm.The 3D printer automatically detects the surface of the bed and automatically adjusts the perfect distance.
  • 【Premium combination】Our package includes 1 set of automatic bed leveling kit and another replacement probe. The probe can be quickly replaced,and it is convenient to replace when in use.
  • 【Widely used】Suitable for 32-bit V4.2.2 Creality/Ender 3 /Ender 3 V2/Ender 3 MAX/Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/CR-10.
  • 【Firmware】1. Download the BL-Touch firmware from the official website of Creality; 2. Move to a formatted SD card without other files; 3. Insert the 3D printer card slot directly to update the program.
4
Image

Product Highlights

  • Creality Official Product: CR Touch auto bed leveling sensor fulfilled simple structure and high precision.Performs multi-point detection on the printing platform and records the height of each detection point.Stable quality, long service life, and can be reused more than 100,000 times.
  • Widely Application: The upgraded CR Touch bed leveling kit is compatible with Creality Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer. (Note: Only compatible with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers).
  • Easy Installation: 3 different kinds of mounting brackets allows for installation on multiple 3d printers.CR-Touch sensor is simple in structure, convenient printing when connected.Automatic compensation of Z axis so as to stable print.
  • Durable & Strong compatibility: Compatible with PEI / sticker/ glass / metal bed.Creality upgraded CR Touch 3d printer auto bed leveling sensor Kit works perfectly with any surface, especially the design of metal push pin allows for longer service life.
  • After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
5
Image

Product Highlights

  • 【Smart Detection Compensation】 Multi-point detection on the printing platform and records the height of each detection point. The system builds a virtual plane based on the height of each point and calculates the platform gradient to automatically compensates for different points. Extension length:0-6mm, positioning accuracy:0.04mm
  • 【High Precision】 After the electromagnetic component is powered on, the probe is extended under suction. When the probe touches the printing platform, the photoelectric sensor on the PCB board detects the contact signal, and the system records the current height of the platform.
  • 【Upgraded to Metal Probe】 CR Touch is upgraded to coming with a metal probe, which can reduce wear and tear, and greatly prolong it's service life. Compared with BL Touch, it has stable quality, long service life, and can be reused more than 100,000 times.
  • 【Easy to Flash Firmware】Download the CR Touch firmware from Creality 3D official website and copy it to the TF/SD card. Insert it directly into the card slot of your 3D printer. The firmware can be updated after power on.
  • 【Wide Application】CR Touch 3d printer auto leveling kit can be used with more 3D printers platforms, like PEI / stickers / glass / metal bed.
6
Image

Product Highlights

  • Firmware Download:Please move to the Official Website to download the firmware and flash it at first.(If your mainboard is V1, use isp to flash firmware of V1.1.4 or V1.1.5(8 bit) mainboard, use SD to flash the new Version V4.2.2 or V4.2.7(32 bit) mainboard; if your mainboard is V2, use USB to flash,The circuit wiring of CR-10S,CR-10S4, CR-10S5, CR 20 are different from the manual).
  • Widely Application:Suitable for Ender-3 / Ender-3s / Ender-3 Pro / Ender 5 / Ender 5 Pro/ CR-10/ CR-20 / CR-20 Pro. (NOTE: Can't use for Ender 3V2, CR-10V2, CR 10S Pro) Please flash the firmware first. Use the ISP cable or SD card to flash the firmware for V1 mainboard(1284P). Use USB cable to flash for V2 Mainboard(2560P). There are two different versions instruction for V1 and V2 mainboard.
  • Easy to Use: BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • Genuine High Quality Set :Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.
  • Troubleshooting Guide: If your computer does not support Progisp please change another computer to try. If the usb cannot be recognized we suggest you to buy a USB to fix it. If you have any questions while installing or using, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.
7
Image

Product Highlights

  • ♥ Widely Application: 3 different mounting brackets allows for installation on several of our printers. This new upgraded Creality BL Touch works for Creality Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3S/Ender 3 MAX/Ender 5/Ender 5 Pro/CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard (Note: ONLY for 32 bit motherboard 3d printers mentioned above).
  • ♥ Easy Firmware Installation:Simply download the BLTouch firmware(Note:words "without adapter"firmware) from the Creality Official Website and save the file to your printer’s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.
  • ♥ Awesome Upgraded BLTouch Kit:Unlike the inductive probe, our Creality BLTouch is a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface. This bltouch sensor works perfectly with any surface, from glass to blue tape or woods, metals and so on.
  • ♥ High Precision:Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.
  • ♥ Genuine High Quality Set:Our package is included 1 set of auto bed leveling kit and an another replacement probe. Just contact us if you have any problems.
9
Image

Product Highlights

  • Easy to Use: Auto-bed leveling gives you the perfect first layer and the ink coating glass makes you stick and remove printed objects easily.

  • Silent: TMC2209 offers whisper quiet and more accurate printing without the need of mechanical limit switch (sensorless).

  • Simplicity: Modular design, built-in power supply, auto bed leveling sensor, no bed adjust knob, plug and play. ER20‘s sleek & streamlined round corners comply with the ergonomic design.

  • Reliable: ER20 supplies resume printing, sparing you the unexpected head-scratching outage. Fully upgraded aluminum profile frame provides durability. The reliable extruder is mounted with an Eryone sensor for hassle-free printing.

  • Power failure resume feature: ER20 support the power failure resume feature. When the power system resume, the printer can resume the print.
10
Image

Product Highlights

  • CR Touch is a creality 3D research Institute self-developed 3D Printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling, it is compatible with more 3D Printer platforms like PEI STICKERS, GLASS, METAL and More printing platform materials
  • CR touch is upgraded to a metal probe, which reduce wear and tear and greatly prolong its service life, it can be reused for more than 100000 times.
  • Multi-point detection Smart compensation; High precision, Low power comsumption; Easy to install, Strong compatibility; Independent research and development, stable function.
  • There are three kinds of install brackets, which is directly easily installed with Ender 3 V2/ Ender 3/ Ender 3 Pro /Ender 3 Max/ Ender 5/ Ender 5s/ Ender 5pro/CR-10/ CR-10 V3 with 32 bit motherboard
11
Image

Product Highlights

  • 【Creality Official product】independent research and development,Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers.Stable function, long service life, and can be reused more than 100,000 times
  • 【Multi-model application 】Specially Designed for Ender 3 V2/Ender 3 Pro/Ender 3/Ender 3 Max/Ender 5/Ender 5s/Ender 5Pro/CR 10/CR 10 V3, Compatible with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer
  • 【Strong compatibility】CR Touch Auto bed leveling Sensor kit,Compatible with glass bed / metal bed / PEI / sticker bed
  • 【Easy to Install and Use】One order contains leveling Module, 3 different mounting brackets and extension cords.Compatible with different 3D printer models ,You can easily install
  • 【After-sales Service】please feel free to contact us for any installation issue,Our after-sales technical team will provide you with detailed solutions within 24 hours.
12
Image

Product Highlights

  • Compatible: The BLTouch kit fits for Creality Ender-6 3D Printer.
  • Easy to Use: [ V3.1 BLTouch Sensor ] BLTouch is an auto leveling sensor for 3D Printers based on open-source,easy to use because it is small and simple. Since BLTouch can use the automatic bed level sensor as usual, gathering information and setting up the firmware will be easy.
  • NOTE: Please make sure your account is allowed to receive messages. If you find there is no message and firmware from us, please contact us.
  • Intelligence, self - check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • High Precision: BLTouch standard deviation repetition accuracy is about 0.005mm.
13
Image

Product Highlights

  • 【Upgraded Auto leveling kit 】With the upgraded metal probe, which is durable than plastic probe(bl touch). Positioning accuracy is less than 0.04mm , higher precision and used up to 100,000 times.
  • 【Ender Series & 32 Bit Motherboard】32 bit motherboard, not 8 bit. (Please check your motherboard, CR touch is not suitable for 8 bit motherboard). CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10.
  • 【Easy To Use】1. Mounting the CR touch to the 3D printer by using the accessories(metal brackers, wiring, screws). 2. Download the CR Touch firmwire from the “Creative official website” and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on.
  • 【Strong compatibility】CR Touch-3D printer auto leveling, compatible with different 3D printer platform, PEI / sticker / glass / metal.
  • 【CR Touch Working Principle】According to the tilt angle between the nozzle and the platform, CR Touch can automatically compensate the printing height of different points to realize the automatically leveling.
14
Image

Product Highlights

  • ➤Easy to Use: This auto bed leveling sensor make it easier to leveling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • ➤Wide Application: Suitable for Ender 3/Ender 3 Pro,Ender 5/5 Plus, CR-10/10 S4/10 S5, CR 10S, CR 20/20 Pro (can't use for CR 10S Pro). It is an auto leveling sensor for 3D Printer based on open-source.
  • ➤Intelligence: Self - check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • ➤High Precision: BL Touch Standard Deviation in repeatability is around 0.005mm, at that precise. BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
15
Image

Product Highlights

  • [Application] - Suitable for Ender 3/Ender 3 Pro,Ender 5, CR-10/10 S4/10 S5, CR 10S, CR 20/20 Pro (can't use for CR 10S Pro). It is an auto leveling sensor for 3D Printer based on open-source. Only Fits 8 bits or V1.1.4/ V 1.1.5 Board
  • [Easy to Use] - This auto bed leveling sensor make it easier to level the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • [Intelligence & self-check & Alarm] - Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
16
Image

Product Highlights

  • This BL Touch kits just work for Sovol SV01 3D Printer. Work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • Self-test - The push pin operate two times in a test when the power is on.
  • Alarm - The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
17
Image

Product Highlights

  • [WIDE APPLICATION] - Creality new upgraded BL Touch works for Creality Ender3 v2/ Ender3/ Ender3 Pro/ Ender 3 Max/ Ender5/ Ender5 Pro/ CR-10 3D Printer (Only fits 3D printer with 32 bit V4.2.2 or V4.2.7 motherboard ). This kit includes 1 set of auto bed leveling kit and an extra replacement probe. Simple, smart and easy to install.
  • [FIRMWARE UPGRADE IN A EASIER WAY] - Simply download the BLTouch firmware from the Creality Official Website and save the file to your printer’s TF/SD card. Insert the card into your printer. Turn on the printer and wait a few seconds for the firmware to update. No more need to use the ISP burner, more convenient to use.
  • [EASY INSTALLATION & USAGE] - With 3 different mounting brackets compatible for multiple 3d printers. BL-Touch sensor is small in size and simple in structure, printing when connected. It can accurately measure the inclination of the hot bed and automatic compensation of Z axis, easily avoid the printing failure caused by uneven hot bed.
  • [HIGN-PRECISION] - Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy. It could work with any kinds of bed materials, such as ABS, PLA, glass, woods, metals, plastic and so on. Any problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
  • [LOW POWER CONSUMPION] - In standby mode, no matter whether it is pulled out or retracted, the standby current of solenoid valve without current flow is less than 15ma, while in working mode, it will rise to 100ms/300ma. Low power consumption to avoid heating problems. Please keep away from magnetic components such as strong magnet motor and fan for installation.
18
Image

Product Highlights

  • ★BZ 3D MKS 3D Touch Auto Leveling Sensor Auto Bed Leveling Sensor For 3D Printers CR-10/Ender 3/ Pro/ CR-10S/S4/S5 Improve Printing Precision
  • ★The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.
  • ★Printer TOUCH is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface.It can greatly improve the printing precision of your 3D Printer.
  • ★Printing can also be achieved even though the platform is not flat.
  • ★If you need more detailed Marlin Settings, please contact me.BZ 3D is committed to providing you with the best service!
19
Image

Product Highlights

  • 【Compatiblity】This new upgraded Creality BL Touch works for Creality Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3S/Ender 3 MAX/Ender 5/Ender 5 Pro/CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard (Note: ONLY for 32 bit motherboard 3d printers mentioned above). With 3 kinds of install racks for different model's printer.
  • 【Easy Firmware Upgrade】Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official website, directly insert into the 3D printer card slot to update the program. No more need to use the ISP burner, which is more convenient to use.
  • 【Easy Installation And Usage】With 3 different mounting brackets can be installed on multiple 3d printers. BL-Touch sensor is small in size and simple in structure, printing when connected. it can accurately measure the inclination of the hot bed and automatic compensation of Z axis, easily avoid the printing failure caused by uneven hot bed, so as to stable print.
  • 【High-precision】The standard deviation of BL-Touch is only 0.005mm, making leveling more convenient. BL Touch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface and automatically adjust. It could work with any kinds of bed materials, such as ABS, PLA, glasses, woods, metals, plastic and so on.
  • 【After-sales Service】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install. If you encounter unsolvable problems during installation and use, please feel free to contact us, refund or replacement will offer.
20
Image

Product Highlights

  • Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.
  • Metal nut is more powerful and will twist more tightly than plastic nuts. The torque of these nuts is large, making it easier to fine tune the hot bed.
  • PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.
  • Non-stick silicone material helps to keep the hotend temperature extremely stable,which Can extend the life of the heater block and extruder by keeping it cleaner.
  • Package Includes 4Pcs Red Aluminum Screw Nut + 4Pcs Yellow Die Spring + 2Pcs Silicone Cover + 2Pcs 0.4mm Nozzle + 2Pcs PC4-M6 Fittings + 2Pcs PC4-M10 Fittings
21
Image

Product Highlights

  • BLTouch is an auto leveling sensor for 3D Printers based on open-source.
  • WitBot has an official BLtouch authorization.
  • High precision. The deviation of accurqcy is ±0.005mm.
  • It is convenient and easy to use. The main functions are self-test, alarm, alarm release, test mode and so on.
  • It is compatible with almost heat bed materials, such as glasses, woods, metals.
22
Image

Product Highlights

  • Firmware Download: Please move to the Official Website to download the firmware and flash it at first.(If your mainboard is V1, use isp to flash of V1.1.4 or V1.1.5(8 bit) mainboard, use SD to flash the new Version V4.2.2 or V4.2.7(32 bit) mainboard; if your mainboard is V2, use USB to flash,The circuit wiring of CR-10S,CR-10S4, CR-10S5, CR 20 are different from the manual).
  • Widely Application:Suitable for Ender-3 / Ende3/ Ender-3 Pro / Ender 5 / Ender 5 Pro/ CR-10 / CR 10S4 / CR 10S5 / CR-20 / CR-20 Pro. (NOTE: Can't use for Ender 3V2, CR-10V2, CR 10S Pro) Please flash the firmware first. Use the ISP cable or SD card to flash the firmware for V1 mainboard(1284P). Use USB cable to flash for V2 Mainboard(2560P). There are two different versions instruction for V1 and V2 mainboard.
  • Easy to Use: BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • Genuine High Quality Set :Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.
  • Troubleshooting Guide: If your computer does not support Progisp please change another computer to try. If the usb cannot be recognized we suggest you to buy a USB to fix it. If you have any questions while installing or using, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.
23
Image

Product Highlights

  • Widely Application: Creality BL Touch works for Creality Ender3 V2/Ender 3/Ender 3 Pro/Ender 3 Max/Ender5/Ender5 Pro with 32 bit V4.2.2/4.2.7 mainboard.(Require 3d printer with 32 bit V4.2.2 or V4.2.7 motherboard )
  • Easy Firmware Installation: Simply download the BLTouch firmware from the Creality Official Website and save the file to your printer’s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.
  • Easy to Install and Use: 3 different mounting brackets allows for installation on several of our printers.
  • High-precision: Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.
  • Genuine High Quality Set: Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.
24
Image

Product Highlights

  • Compatible: The BLTouch kit just fits for Creality CR-10 V2,CR-10 V3 3D Printer. NOTE: Please make sure your account is allowed to receive messages. If you find there is no message and firmware from us, please contact us.
  • Easy to Use: BLTouch is an auto leveling sensor for 3D Printers based on open-source,easy to use because it is small and simple. Since BLTouch can use the automatic bed level sensor as usual, gathering information and setting up the firmware will be easy.
  • Intelligence, self - check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • Wiring: One I / O (orange line: PWM or software PWM) for control One I / O (white line: endstop / Z-probe) GND and + 5V power supply.
  • PLEASE NOTE: It requires a firmware update by yourself.
25
Image

Product Highlights

  • This BL Touch kits just works for Creality CR-10 V2 3D Printer.
  • It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • Self-test : The push pin operate two times in a test when the power is on.
  • Alarm : The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
26
Image

Product Highlights

  • Application: Suitable for Ender-3/Ender-3s /Ender-3 Pro/Ender 5/Ender 5 Plus/CR-10 /CR-10S/CR 10S4/CR 10S5/CR-20 /CR-20 Pro and so on 3D Printer. NOTE: (1) It doesn't fit CR-10 V2, CR-10 V3, CR 10S Pro; (2) If your Ender 3/3 Pro/5 Motherboard is V1.1.4/V1.1.5, need to use ISP Cable to flash firmware according the instruction. If your Ender 3/3 Pro/5 Motherboard is V4.2.2/V4.2.7, just use the SD card to flash firmware.
  • Easy to Use: [ V3.1 BLTouch Sensor ] BLTouch is an auto leveling sensor for 3D Printers based on open-source,easy to use because it is small and simple. Since BLTouch can use the automatic bed level sensor as usual, gathering information and setting up the firmware will be easy. NOTE: Please make sure your account is allowed to receive messages. If you find there is no message and firmware from us, please contact us.
  • Intelligence, self - check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • High Precision: BLTouch standard deviation repetition accuracy is about 0.005mm.
  • Package: 1 x BLTouch ,1 x Connector ,1 x Tie ,1 x Rack ,1 x M3X8 ,1 x Pinboard A ,1 x M3X6 ,1 x ISP ,1 x Pinboard,1 x Burner.
27
Image

Product Highlights

  • 【Widely Application】This Creality cr touch automatic leveling kit comes with 3 mounting brackets, making it compatible with various types of 3D printers, such as Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/ Ender 5 Plus / CR-10 series. (Note:Only applicable to 32 Bit V4.2.2/ V4.2.7 Motherboard 3D Printers)
  • 【Easy to install and easy to use】With instructions, you can choose a suitable mounting bracket to install this CR Touch Auto Leveling Kit to your 3D printer, and download the CR Touch program from the Creative 3D official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on.
  • 【Independent research and development Stable function】CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times.
  • 【Multi-point detection Smart compensation】CR Touch performs multi-point detaction on the printing platform and records the heigh of each detaction point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.
  • 【Strong compatibility】Creality CR Touch auto leveling kit Compatible with PEI / sticker / glass / metal platform.
28
Image

Product Highlights

  • 【Widely Application】Suitable for Ender-3 / Ender-3s / Ender-3 Pro / Ender 5 / Ender 5 Pro/ CR-10 / CR-10S / CR 10S4 / CR 10S5 / CR-20 / CR-20 Pro. (NOTE: Can't use for Ender 3V2, CR-10V2, CR-10 V3, CR 10S Pro) Please flash the firmware first. Use the ISP cable to flash the firmware for V1 mainboard. Use USB cable to flash for V2 Mainboard. If you have a V 4.2.2 mainboard, please download the instruction from here: https://m.media-amazon.com/images/I/C1i4W82Kq+S.pdf
  • 【Firmware】Please move to the Creality Official Website to download the firmware and flash it at first, For V1 mainboard, use isp to flash of V1.1.4 or V1.1.5 (8 bit) mainboard; For V4 mainboard, use SD to flash the new Version V4.2.2 or V4.2.7(32 bit) mainboard; For V2 mainboard, use USB to flash,The circuit wiring of CR-10S/CR-10S4/CR-10S5/CR 20 are different from the manual.
  • 【Awesome BLTouch Upgraded Kit】Unlike the inductive probe, Our Creality BLTouch auto bed leveling kit was a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface. This touch sensor works perfectly with any surface, from glass to blue tape or woods, metals and so on.
  • 【High-precision】 BL Touch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • 【After-sales Service】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install. If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours .
29
Image

Product Highlights

  • 【𝗜𝗻𝗱𝗲𝗽𝗲𝗻𝗱𝗲𝗻𝘁 𝗿𝗲𝘀𝗲𝗮𝗿𝗰𝗵 𝗮𝗻𝗱 𝗱𝗲𝘃𝗲𝗹𝗼𝗽𝗺𝗲𝗻𝘁 】CR Touch is upgraded to a metal probe, Exquisite exterior design,Positioning accuracy ≤0.04mm ,  Automatic detection and leveling , It can be reused for more than 100,000 times.
  • 【𝗘𝗮𝘀𝘆 𝘁𝗼 𝗶𝗻𝘀𝘁𝗮𝗹𝗹 𝗮𝗻𝗱 𝗲𝗮𝘀𝘆 𝘁𝗼 𝘂𝘀𝗲】Download the CR Touch program from the Creative 3D official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on. 
  • 【𝗪𝗶𝗱𝗲𝗹𝘆 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻】3 different mounting brackets allow to install on our multiple printers Compatible to Ender 3 V2/Ender 3 Pro/Ender 3/Ender 3 Max/Ender 5/Ender 5s/Ender 5Pro/CR 10/CR 10 V3 (𝗡𝗼𝘁𝗲: 𝗢𝗻𝗹𝘆 𝗮𝗽𝗽𝗹𝗶𝗰𝗮𝗯𝗹𝗲 𝘁𝗼 𝟯𝟮 𝗕𝗶𝘁 𝗩𝟰.𝟮.𝟮/𝗩𝟰.𝟮.𝟳 𝗠𝗮𝗶𝗻𝗯𝗼𝗮𝗿𝗱 𝟯𝗗 𝗣𝗿𝗶𝗻𝘁𝗲𝗿)
  • 【𝘀𝘁𝗿𝗼𝗻𝗴 𝗰𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆】compatible with PEI.Stickers.Glass.Metal and more printing platform materials 
  • Exquisite appearance design and packaging, when you receive the goods, Maybe you'll love it, maybe you will take it as a gift to the same love of 3D printer friends.𝗣𝗹𝗲𝗮𝘀𝗲 𝗳𝗲𝗲𝗹 𝗳𝗿𝗲𝗲 𝘁𝗼 𝗰𝗼𝗻𝘁𝗮𝗰𝘁 𝘂𝘀 𝗳𝗼𝗿 𝗮𝗻𝘆 𝗶𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗶𝘀𝘀𝘂𝗲,𝘄𝗲 𝘄𝗶𝗹𝗹 𝗿𝗲𝗽𝗹𝘆 𝘆𝗼𝘂 𝘄𝗶𝘁𝗵 𝗶𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗶𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻 𝘄𝗶𝘁𝗵𝗶𝗻 𝟮𝟰 𝗵𝗼𝘂𝗿𝘀.
30
Image

Product Highlights

  • BLTouch is an auto leveling sensor for 3D Printers based on open-source.
  • Simple, Smart, High-precision.
  • It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • Come with 1m extension cable set
31
Image

Product Highlights

  • UPGRADED VERSION: CR-touch is compatible with more 3D printer platforms. This new bed leveling sensor is upgraded to a metal probe, which reduces wear and tear and greatly prolongs its service life - it works over 100,000 times, more stable and cost-effective.
  • EASY INSTALLATION & USE: Download the CR Touch program from the Creative official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on.
  • SMART AUTO LEVELING: With 0-6mm extension length, 0.04mm positioning accuracy and automatic detection and leveling, CR Touch Kit makes leveling with pinpoint accuracy.
  • BROAD COMPATIBILITY: This bed leveling sensor kit is compatible with PEI / sticker bed / glass bed / metal bed and more printing platform materials.
  • PROFESSIONAL TIMELY SERVICE: We provide life-time professional technical supports. If you encounter any problem during installation and use, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours.
32
Image

Product Highlights

  • 【Upgrade Independent development】CR Touch is upgraded to a metal probe, Exquisite exterior design,Positioning accuracy ≤0.04mm , Automatic detection and leveling , It can be reused for more than 100,000 times.
  • 【Easy to install and easy to use】Download the CR Touch program from the Creative official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on.
  • 【Widely Application】The kit contains 3 different mounting brackets and extension cords. You can easily install
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit motherboard.
33
Image

Product Highlights

  • ❤【Creality BL Touch 3D Printer Upgraded Auto Bed Leveling Sensor Kit】Creality BL Touch 3D Printer Upgraded Auto Bed Leveling Sensor Kit works perfectly with any surface.After installing this product, your printer will automatically detect the bed height at multiple locations around the surface of the bed and automatically adjust so the hotend will always be the perfect distance away from the bed.1 Year Warranty.
  • ❤【Widely Application】Suitable for Ender-3 / Ender-3s / Ender-3 Pro / Ender 5 / Ender 5 Pro/ CR-10 / CR-10S / CR 10S4 / CR 10S5 / CR-20 / CR-20 Pro. (NOTE: Can't use for Ender 3V2, CR-10V2, CR-10 V3, CR 10S Pro).You should check your mainboard version before installing BL touch,If you find your mainboard is V1.1.4/V1.1.5,just follow the instruction.If it is V4.2.2/V4.2.7 version,download the corresponding firmware and use the SD card to flash the firmware.
  • ❤【Very High-Precision】An auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.BLTouch's Standard Deviation in repeatability is around 0.005mm that make it easier to use and to increase the success rate of shaping.BLTouch fulfilled simple structure and high precision by using progressively designed solenoid and hall sensor.
  • ❤【Package includes】1 x BLTouch ,1 x Connector ,1 x Tie ,1 x Rack ,2 x M3X8 ,2x M3X6 ,1 x Pinboard A ,1 x ISP Pinboard,1 x Burner,1 x BLTouch-SM,1 xManual.Our Creality BLTouch auto bed leveling kit was a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface.
  • ❤【AFTER SALE GUARANTEE】For any quality problem, resend a new or unconditional full refund.100% money back guarantee - For whatever reason, you are not satisfied, you can request a replacement or a full refund. Customer satisfaction is our tireless pursuit. If you are dissatisfied with the product, don't be too quick to leave a negative comment. Contact us! We will show you a sincere attitude and satisfactory solution.
34
Image

Product Highlights

  • 【Multi-point detection& Smart compensation】CR Touch performs multi-point detection on the printing platform and records the heigh of each detection point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensate for different points
  • 【lndependent research& Development stable function】CR Touch is a Creality 3D Research Institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling, it is compatible with more 3D printer platforms, more stable, and cost-effective
  • 【More durable metal probes】Compared to BL Touch, CR Touch is upgraded to a metal probe, which reduces wear and tear and greatly prolongs its service life
  • 【Easy to install& Easy to use】Download the CR Touch program from the Creality official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on
  • 【Wide application& strong compatibility】Compatible with Carborundlum Glass Platform Board, PEl printing plate, Soft Magnet Sticker, and Other printing platforms. Compatible with a variety of printers, Equipped with ‘A’, ‘B’, ‘C’ three kinds of brackets, ‘A’: Ender-3 Max, ‘B’: Ender-3 V2, ‘C’: Ender-3, 3s, 3Pro, Ender-5, 5S, 5Pro, CR-10, which can fit more Creality 3D printers
35
Image

Product Highlights

  • 【Widely Application】: Creality BL Touch works for Creality Ender3 v2/Ender3/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro with 32 bit v 4.2.2/4.2.7 mainboard.(Require 3d printer with 32 bit V4.2.2 or V4.2.7 motherboard )
  • 【Easy Firmware Installation】: Simply download the BLTouch firmware(Note:words "without adapter"firmware) from the Creality Official Website and save the file to your printer’s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.
  • 【Easy to Install and Use】3 kinds of Different mounting brackets allows for installation on several of our printers.
  • 【High-precision】Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.
  • 【Genuine High Quality Set】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
36
Image

Product Highlights

  • Package Include: BLTouch V3.1 Auto Bed Leveling Sensor(Includes 1 replacement probe),Capricorn PTFE Teflon Tubing 1M, Aluminum Extruder,4* Premium Metal Bed Springs, 2*PC4-M6 Pneumatic Fittings, 2*PC4-M10 Fittings, 2*0.4mm Nozzle.
  • Compatible: This BL Touch fits for Creality Ender3 v2/Ender3/Ender3 Pro/Ender5/Ender5 Pro/CR-10 with 32 bit v 4.2.2(4.2.7) mainboard.Notice:Just for 32 bit motherboard printers.
  • Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.NOTE: The springs are around 25mm long, which is longer than ender 3 v2 and ender 3 printer springs. You may use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the springs.
  • This bundle includes Capricorn PTFE Teflon Tubing which is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal diameter. Reduces the ""wiggle room,"" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.The aluminum extruder is lightweight and strong, ensuring a more even feed rate over time .
37
Image

Product Highlights

  • Widely Application: This BL Touch kits works for Creality Ender 3 / Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/ CR-10 3D Printer with 32 bit V4.2.2 or V4.2.7 mainboard. It requires 3d printer with 32 bit V4.2.2 or V4.2.7 motherboard.
  • Easy Firmware Installation: Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official website, directly insert TF/SD card and the power cord,then press the switch.Wait a few seconds for the firmware to install. Note:Every machine has its own operation interface.
  • High-Precision:The standard deviation of BL-Touch is around 0.005mm which makes it easy leveling with pinpoint accuracy. BLTouch auto bed leveling sensor fulfilled simple structure and high precision. It could work with any kinds of bed materials, such as glasses, woods, metals, plastic and and all materials.
  • Easy Installation And Usage: 3 different mounting brackets allows for installation on multiple 3d printers.BL-Touch sensor is simple in structure and small in size, convenient printing when connected. Accurately measure the inclination of the hot bed and automatic compensation of Z axis, avoid uneven hot bed so as to stable print.
  • Alarm : The LED light blinks if a problem was found on a self-test or during operation.If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
38
Image

Product Highlights

  • 【Widely Application】: Creality BL Touch works for Creality Ender3 v2/Ender3/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro with 32 bit v 4.2.2/4.2.7 mainboard.(Require 3d printer with 32 bit V4.2.2 or V4.2.7 motherboard )
  • 【Easy Firmware Upgrade】Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official website, directly insert into the 3D printer card slot to update the program. No more need to use the ISP burner, which is more convenient to use.
  • 【Easy Installation And Usage】With 3 different mounting brackets can be installed on multiple 3d printers. BL-Touch sensor is small in size and simple in structure, printing when connected. it can accurately measure the inclination of the hot bed and automatic compensation of Z axis, easily avoid the printing failure caused by uneven hot bed, so as to stable print.
  • 【High-precision】Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.
  • 【Genuine High Quality Set】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
39
Image

Product Highlights

  • 💎Intelligent leveling and z-axis height compensation make printing easier
  • 💎Accurate measurement, small error, high leveling accuracy
  • 💎Injection probe, light and flexible
  • 💎Patch positioning sensor, higher consistency
  • 💎New translucent white PC shell, more aesthetic
40
Image

Product Highlights

  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
  • 【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install
  • 【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable quality, long service life, and can be reused more than 100,000 times.
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit motherboard.(3d printer accessory with the best experience)
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed
41
Image

Product Highlights

  • 【High Precision】The accuracy deviation of our Geeetech 3D Touch V3.2 is 0.005mm,that make it easier to use and to increase the efficiency and success rate of printing.
  • 【Intelligent Measurement】Our Geeetech 3D Touch V3.2 enables automatic bed leveling cause it comes with a lightweight touch-based 3D printer bed leveling probe which works perfectly with any surface, from glass to blue tape or woods, metals and so on.
  • 【2 Wiring】Our package was included 2 different length wiring easy to disassembleset when the distance between your printer interface and the 3d touch installation position is different,meet the wiring length needs of different printers.
  • 【High Compatibility】Suitable for Geeetech a10/a20/a30 secries 3d printer,and any 3d printer that can match our 3d touch wiring port and firmware.
  • 【100% Satisfaction Warranty】If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours. AND PLEASE NOTE: It requires a firmware update by yourself.
42
Image

Product Highlights

  • 【Product durable】CR Touch is a Creality 3D Research Institute self -developed 3Dprinter platform leveling solution based on hundreds of millions ofuser data used by the creators ,Stable quality and long service life,It can be reused for more than 100,000 times.
  • 【Creality ideal companion】Creality CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit V4.2.2/V4.2.7 motherboard.(3d printer accessory with the best experience)
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed and more 3D printing platform materials, compatible with Ender 3 series / Ender 5 series / CR10 series equipment and firmware.
  • 【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install the device by following the steps in the user manual for the CR Touch. Import the firmware into the printer and wait for a few seconds to install the firmware. Easily enjoy the fun of 3D printing.
  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
43
Image

Product Highlights

  • 【Compatiblity】This new upgraded Creality BL Touch works for Creality Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3S/Ender 3 MAX/Ender 5/Ender 5 Pro/CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard (Note: ONLY for 32 bit motherboard 3d printers mentioned above). With 3 kinds of install racks for different model's printer.
  • 【Easy Firmware Upgrade】Copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
  • 【Awesome Upgraded BLTouch Kit】Unlike the inductive probe, our Creality BLTouch is a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface. This bltouch sensor works perfectly with any surface, from glass to blue tape or woods, metals and so on.
  • 【High Precision】The standard deviation repetition accuracy is about 0.005mm. After installing this bltouch, your printer will automatically detect the bed height at multiple locations around the surface of the bed and automatically adjust so that the hotend will always be the perfect distance away from the bed.
  • 【Genuine High Quality Set】Our package was included 1 set of auto bed leveling kit and an another replacement probe. Return or replacement for any quality problems. We strive to provide the best experience for our customers.
44
Image

Product Highlights

  • [Compatibility]: This bltouch kit is suitable for Ender-3/ Ender-3 Pro/ Ender 5/ Ender 5 Pro/ CR-10/ CR-10S/ CR 10 S4/ CR 10 S5/ CR-20 (NOT APPLICABLE TO Ender 3 V2, CR 10S Pro, CR-10 V2, CR-10 V3).
  • [Firmware Update]: For 8 bit mainboard (V1.1.4/V1.1.5), use the ISP cable to flash firmware; for 32 bit mainboard (V4.2.2/V4.2.7), use the formated SD card to flash firmware. Please move to the Creality official website to download the firmware file corresponding with your printer.
  • [Installation Instruction]: For Ender-3, Ender-3 Pro, Ender 5, Ender 5 Pro, CR-10 printer, follow the instruction in the package to install this bltouch kit; for CR 10S, CR-10 S4, CR-10 S5, CR 20 printer, please download the instruction from here: https://m.media-amazon.com/images/I/B1upgHM92QS.pdf
  • [Wide Application]: BL Touch is an auto-leveling sensor for 3D printers which can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as ABS, PLA, glass, plastic, metal, and so on.
  • [High-Precision]: The standard deviation repetition accuracy is about 0.005mm. After installing the bltouch, your printer will automatically detect the bed height at multiple locations around the surface of the bed and automatically adjust so that the hotend will always be the perfect distance away from the bed.
45
Image

Product Highlights

  • Compatible: This CR Touch newly design fits for Creality Ender3 v2/Ender3/Ender3 Pro//Ender3 Max/Ender5/Ender5 Pro/CR-10 with 32 bit v 4.2.2(4.2.7) mainboard.Notice:3 kinds of racks for compatible printers.
  • Easy to install and use:Download firmware from Creality official website to the TF card or memory card;Directly insert it into the printer to update the grogram.You don’t need to use ISP burner,which is more convenient to use.just connect the cable to the 32 bit motherboard.
  • Smart compensation: CR Touch performs multi-point detection on the printing platform and records the heigh of each detection point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.
  • Wide application and Long service life: Compatible with ABS,PLA,glass,metal,plastic and all materials. It can be reused for more than 100000 times due to the stable quality and more durable metal probe.
  • PLEASE NOTE: It requires a firmware update by yourself. If you have any questions while installing or using, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.
46
Image

Product Highlights

  • WIDELY APPLICATION: Our Upgraded Creality BL Touch V3.1 fits for Creality Ender 3 V2 / Ender 3 / Ender 3 Pro / Ender 3S / Ender 3 MAX / Ender 5 / Ender 5 Pro / CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard.(Note: Only applicable to the above 3d printers with 32-bit motherboard)
  • LOW POWER CONSUMPION: In standby mobe, no matter whether it is pulled out or retracted, the standby current of solenoid valve without current flow is less than 15ma, while in working mode, it suddenly rises to 100ms/300ma. Low power consumption and avoiding heating problems. Please keep away from magnetic components such as strong magnet motor and fan for installation.
  • EASY TO INSTALL AND USE: Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official website, directly insert into the 3D printer card slot to update the program. No more need to use the ISP burner, which is more convenient to use.
  • HIGH-PRECISION: BLTouch auto bed leveling sensor fulfilled simple structure and high precision by using progressively designed solenoid and Hall Effect control. BLTouch's Standard Deviation in repeatability is around 0.005mm that make it easier to use and to increase the success rate of shaping. Therefore, the platform board can be selected at will. Compatible with ABS, PLA, glass, metal, plastic and all meterials.
  • STRONG COMPATIBILITY: With 3 different mounting brackets can be installed on multiple 3d printers. 3D printer auto level is small in size and simple in structure, printing when connected. it can accurately measure the inclination of the hot bed and automatic compensation of Z axis, easily avoid the printing failure caused by uneven hot bed, so as to stable print. If you have any question, please feel free to contact us!
47
Image

Product Highlights

  • This product is plug and play for Ender 3 / Pro HOWEVER ENDER 3 V2/5 USERS MUST UPDATE FIRMWARE. THIS FIRMWARE can be found at the link in this listing’s product description. After installing this product, your printer will automatically detect the bed height at multiple locations around the surface of the bed and automatically adjust so the hotend will always be the perfect distance away from the bed. PLEASE MAKE SURE YOU FLASH THE BOARD OR IT WILL NOT WORK. Flashing the board takes 3 minutes!
  • All necessary components for installation on Creality machines come included in this kit such as the ISP cable which will be used to connect the control board to the computer. For this product to work as intended, a new firmware must be flashed onto the control board. Link for firmware download is in this listing’s product description.
  • The BL Touch is an incredibly accurate and reliable auto-mesh bed leveling sensor that probes individual spots for differences in Z height on any print surface such as glass, aluminum, PEI, BuildTak with incredible accuracy to 0.005mm. This is especially great for users with small imperfections or warping in their print surface as manual leveling will never be able to account for these variables. Includes 1.5m extension cable for neat cable management solutions.
  • This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others. It also comes with a bootloader pre-installed to for easy firmware updates. This board also has support for a color display and filament run out sensor.
  • F1RST LAYER is an authorized distributor for both Antclabs and Creality. Amazon customer support is NOT suited for providing the Tech Support needed for this 3D Printing product. PLEASE CONTACT F1RSTLAYER DIRECTLY for the Tech support you need, done right, the F1RST time! All products in this bundle are genuine from the factories in Korea and China. Customer satisfaction is our main priority so if you have any questions about this product, please contact us and we will be happy to assist you
48
Image

Product Highlights

  • This product is only compatible with 4.2.7/4.2.2 motherboards. Firmware link in product description.
  • The BL Touch automatically detects the beds height at multiple locations around the beds surface.
  • Capricorn XS Series PTFE Bowden tubing is included to help improve the accuracy of the printers.
  • The 6 upgraded bed springs included are much stronger and stiffer than stock Ender series springs.
  • The PC4-M6 + PC4-M10 provided are some of the best available and 2 of each are included in this kit.
49
Image

Product Highlights

  • 【Compatiblity】This new upgraded Creality BL Touch works for Creality Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3S/Ender 3 MAX/Ender 5/Ender 5 Pro/CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard (Note: ONLY for 32 bit motherboard 3d printers mentioned above). With 3 kinds of install racks for different model's printer.
  • 【Easy Firmware Upgrade】Copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
  • 【Awesome Upgraded BLTouch Kit】Unlike the inductive probe, our Creality BLTouch is a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface. This bltouch sensor works perfectly with any surface, from glass to blue tape or woods, metals and so on.
  • 【High Precision】The standard deviation repetition accuracy is about 0.005mm. After installing this bltouch, your printer will automatically detect the bed height at multiple locations around the surface of the bed and automatically adjust so that the hotend will always be the perfect distance away from the bed.
  • 【Genuine High Quality Set】Our package was included 1 set of auto bed leveling kit and an another replacement probe. Return or replacement for any quality problems. We strive to provide the best experience for our customers.
50
Image

Product Highlights

  • 【Wide Application】New upgraded Creality BL Touch V3.1 works for Creality Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3S/Ender 3 MAX/Ender 5/Ender 5 Pro/CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard (Note: Only applicable to the above 3d printers with 32-bit motherboard).
  • 【Easy Firmware Upgrade】Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official website, directly insert into the 3D printer card slot to update the program. No more need to use the ISP burner, which is more convenient to use.
  • 【Easy Installation And Usage】With 3 different mounting brackets can be installed on multiple 3d printers. BL-Touch sensor is small in size and simple in structure, printing when connected. it can accurately measure the inclination of the hot bed and automatic compensation of Z axis, easily avoid the printing failure caused by uneven hot bed, so as to stable print.
  • 【High-precision】The standard deviation of BL-Touch is only 0.005mm, making leveling more convenient. BL Touch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface and automatically adjust. It could work with any kinds of bed materials, such as ABS, PLA, glasses, woods, metals, plastic and so on.
  • 【After-sales Service】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install. If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
51
Image

Product Highlights

  • Drop In Auto Leveling Upgrade: CR-Touch is the latest auto leveling upgrade kit developed by Creality. Featuring Precision, stability and reduced cost, the CR-Touch is a great option for leveling kit.
  • Durable Metal Push-Pin: A plastic push-pin tends to degrade and requires replacement from time to time, the new CR-Touch uses a metal push-pin, allowing for longer service time.
  • Easy Calibration: Instead of leveling the bed manually yourself, the CR-Touch gathers the bed deviation data by touching multiple points in the bed and compensating for them accordingly,allowing for hassle-free bed leveling.
  • Wide Compatibility: With 3 different types of bracket, this CR-Touch bed leveling upgrade kit is compatible with Creality Ender 3 V2, Ender 3, Ender 3 Pro, Ender 3S, Ender 3 MAX, Ender 5, Ender 5 Pro and CR-10. (Note: Only compatible with printers with 32-Bit V4.2.2/V4.2.7 Board). In addition, the CR-Touch works flawlessly on any bed surface regardless of surface type or material.
  • Effortless Installation and Upgrade: The new CR-Touch upgrade kit shares the same firmware with the BL-Touch, corresponding firmware can be downloaded from Creality Support Center.

"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates". AS AN AMAZON ASSOCIATE, WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES.

JUMP TO [Show]