Best Arduino Motors Drives for 2024

By Customer Ratings

1
Image

Product Highlights

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 models are optional.
  • Stepper Motor: 40Ncm holding torque; Rated current 1.7A & resistance 1.5ohms; 1.8 deg. step angle; bipolar 4-wire.
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help.
2
Image

Product Highlights

  • A monolithic integrated, high voltage, high current, 4-channel driver
  • Size:6.8cm x 5.5cm x 2cm - 2.68inch x 2.17inch x 0.79inch.
  • Tested compatible for Arduino Mega, Diecimila & Duemilanove
  • 2 external terminal power interface, for seperate logic/motor supplies
  • High Quality Atomic Market Product
3
Image

Product Highlights

  • Pay attention: Please read the instructions or pictures carefully, use the correct circuit diagram to avoid short circuit, short circuit will produce high temperature and cause the battery Holder box to melt
  • Color:Siler+Black;Voltage:DC 3V;Rated Speed:24000 RPM
  • Motor Body Diameter:27mm/1.06";Mounting Hole Distance(center to center):15mm/0.59",Shaft Size:10x2.0mm/0.39"x0.08"(L*D);Motor Body Length;38mm/1.46"
  • Great fun Motor,perfect for mini fan,electric toys and science experiments etc.Will work with many power sources batteries and solar cells work perfectly
  • Package including:6pcs DC motor,6pcs battery holder,6pcs rocker switch,6pcs motor mounting Bracket,12pcs 9.8" Electronic wire,84pcs plastic gears(Random Color) ,4 pcs 4 vanes propeller,2pcs 3 vanes propeller and 40cmΦ3 Heat shrink tube
4
Image

Product Highlights

  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input.
  • The L298P shield DC motor driver has PWM speed control mode; dual high-power H-bridge driver.
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
  • Stack design can be directly plugged into the Arduino, easier to use.
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
5
Image

Product Highlights

  • L293D motor shield, the input voltage DC4.5-25V
  • 600mA output current capability per channel
  • 1.2A peak output current (non repetitive)per channel
  • Logical "0" input voltage up to 1.5 V(high noise immunity)
  • Internal clamp diodes
6
Image

Product Highlights

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
  • Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
7
Image

Product Highlights

  • 【Latest CH340G CNC Shield Expansion Board V3.0】—CNC shield board is suitable for CH340G Shield 3.0 version for Arduino, compatible for GRBL 0.9. Compatible Stepper Motor Drive: A4988/ DRV8825
  • 【DRV8825 Stepper Motor Driver with Heat Sinks】—High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for Arduino software and hardware
  • 【For Professional 3D printer CNC Kit】—Professional module board for Kuman R3, fit well for Arduino, a great assortment set for R3 starters to learn with and do not miss it
  • 【Premium Quality】—Each sensor is made of premium module, so convenient for circuit connection. These components can be used in a wide range of application, simple and the service life is long
  • 【35 Pcs CNC Kit】—Multiple types of modules or components in this set, which will meet your different needs of learning or experiment. CNC Shield Board, For Kuman R3, 4 DRV8825 Stepper Motor Drive, 4 Aluminum Cooler, 3 For Nema 17 Stepper Motor, 3 Mounting Base for Nema 17 Stepper Motor, 12 M3 Screws, 3 Mechanical Switch, 3 3pin Cable (70cm), USB Cable for R3 Board (1.5m)
9
Image

Product Highlights

  • power supply: 2.5V to 12V
  • high voltage protection function
  • Drive DC motor
10
Image

Product Highlights

  • ★L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.
  • ★2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter
  • ★2 external terminal power interface, for seperate logic/motor supplies
  • ★Fully compatible for Mega, Diecimila & Duemilanove
  • ★Package Includes:1PCS L293D Motor Drive Shield Expansion Board
11
Image

Product Highlights

  • New version 2.3!
  • Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
  • Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
  • Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.
  • As of 3/21/2014 we are shipping motor shields with the terminal blocks, and power jumper pre-soldered on. You'll still need to do a little soldering to put on the shield-headers (or stacking headers) but it should be even easier and faster to get started!
12
Image

Product Highlights

  • H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak)
  • Chip: TB6612FNG motor driver chip
  • Completely stackable design: 5 address-select pins means up to 32 stackable shields
  • Characteristic: Arduino interface is fully compatible expansion
  • Feature: Motors automatically disabled on power-up
13
Image

Product Highlights

  • DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W.
  • STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time.
  • FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation.
  • PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ.
  • UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module.
14
Image

Product Highlights

  • L298N As Main Driver Chip Makes Strong Driving Ability And Strong Anti-interference
  • Use Large-capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability
  • DC Motor Voltage: 3V ~ 6V,With EMC, It Has An Anti-interference Ability
  • Tire Diameter: 65mm,Tire Width: 25mm
  • Package: 1pcs L298N Module, 4pcs Car Tire,4pcs DC Motor
15
Image

Product Highlights

  • Stepper motor with a standard interface.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift)
16
Image

Product Highlights

  • L293D Motor Drive Shield can drive 4 DC motors or 2 stepper motors or 2 servo. It's a commonly used DC Motor Drive Module.
  • 4 H-Bridges: each provides 0.6A (1.2A peak current) with thermal protection and can run motors on 4.5V to 16V DC.
  • Contains 2 interfaces for 5V servos connected to the Arduino's high-resolution dedicated timer - no jitter.
  • Pins designed to be suitable for Arduino R3, Mega, Diecimila and Duemilanove.
  • With 2 external terminal power interfaces for DC motor, with an input voltage of 4.5V to 16V.
17
Image

Product Highlights

  • 2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!
  • Can drive 4 DC motors or 2 stepper motors or 2 Servo
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
  • 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
18
Image

Product Highlights

  • Stepper motor with a standard interface, when used directly pluggable.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking
  • Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board (with a little gift)
19
Image

Product Highlights

  • L298N Dual Motor Controller Module is a neat motor control module based on the L298N H-bridge IC that can allows you to control the speed and direction of two DC motors, or control one bipolar stepper motor with ease
  • L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value
  • Well Built Dual-channel H-bridge driver working mode creates higher working efficiency
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
20
Image

Product Highlights

  • Industrial-grade Stepper Driver
  • Suit for Nema 17 and 23 Stepper Motor
  • 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
21
Image

Product Highlights

  • The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
  • EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.
  • The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V.
  • Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control.
  • EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
22
Image

Product Highlights

  • HiLetgo L9110S H-bridge DC Stepper Motor Driver Controller Board
  • Dual motor driver chip L9110S
  • Module supply voltage :2.5-12V
23
Image

Product Highlights

  • 【1】Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire.
  • 【2】Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on.
  • 【3】Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current.
  • 【4】The largest 32 divisions of the 6 models are optional; Suitable for 4 wires, 6 wires and 8 wires stepper motor.
  • 【5】Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion.
24
Image

Product Highlights

  • Operating Voltage: DC 5V - 36V; The trigger source: digital high-low (DC3.3V - 20V); continuous current: 15A, enhance cooling conditions, the maximum current up to 30A; power: 400W.
  • High Reliability, High Availability: It adopts double MOS parallel active output to show lower internal resistance,greater electric current and power. Besides it works at 15A,400W under common temperature which satisfies most devices usage and realizes the control of great power devices in a relaxed way.
  • Supporting Multiple Signal Source Triggers: Can be connected microcontroller IO port, PLC interfaces,  DC power, etc.
  • PERFECT SUPPORT PWM: You can access the PWM signal, the signal frequency 0--20KHZ perfect support.
  • WIDELY APPLICATIONS:You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps,  solenoid valves, etc., can input PWM, control motor speed, lamp brightness and so on.
25
Image

Product Highlights

  • --Support for 4-axis linkage, you can connect four stepper motor drives or servo drives
  • --Support automatic probe tool, Emergency input, limit switch, connecting electronic handwheel.
  • --Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
  • --4 general-purpose isolated relay drive output can drive four relays for controlling the spindle starts, forward and reverse rotating, pumps and other device.
26
Image

Product Highlights

  • This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip.
  • Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel.
  • Tested compatible for Arduino Mega, Diecimila & Duemilanove.
  • 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter.
  • Multi-function, easy to operate, a strong driver library support and feature updates.
27
Image

Product Highlights

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
  • Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
28
Image

Product Highlights

  • L298N main driving chip, high drive ability, low calorific value, strong anti-interference capability.
  • Dual H bridge DC stepper module, more stable and higher work efficiency.
  • Size: 43 * 43 * 27 mm/1.69 * 1.49 * 1.06in
  • With built-in 78M05 to supply power, to avoid the damage of voltage regulator chip, when the driving voltage is greater than 12V, please use the external 5V logic power supply.
  • Package: 5 pcs L298N motor controller board module
29
Image

Product Highlights

  • √ Module name : dual H bridge motor drive module
  • √ Maximum power : 25W
  • √ Weight : 30 g
  • √ Peripheral dimensions : 43*43*27mm
  • Main control chip : L298N
    Packaging : electrostatic bag
    Logical voltage : 5V
    Drive voltage : 5v-35v
    Logical current : 0mA-36mA
    Driving current : 2A(MAX single bridge)
    Storage temperature : - 20 ℃ to + 135 ℃
30
Image

Product Highlights

  • L298N has such characteristics as strong driving ability, low calorific value and strong anti-interference ability
  • L298N as main driver chip makes strong driving ability/small heating/strong
  • Dual-channel H-bridge driver working mode creates higher working efficiency
  • Using large capacity filter capacitor, this module can follow current to protect diodes, and improve the reliability
  • This module can use built-in 78M05 for electric work via a driving power supply part. But to avoid the damage of the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
31
Image

Product Highlights

  • The signal is shown in the figure
  • The connecting method is shown inbelow figure after enable ENA ENB
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.
  • Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled
  • Package Included - 5 pcs L298N Motor Driver Controller Board Modules.
33
Image

Product Highlights

  • Type: 2pcs L293D motor control shield, a fully functional motor expansion board can drive various simple to slightly complex projects.
  • Features: Multi-function, easy to operate, with powerful driver library support and function updates.
  • Usage: Can drive 4-way DC motor or 2-way stepper motor as well as 2-way steering gear. Supports the latest Arduino UNO, Arduino Mega 2560.
  • Regular Collocation: Drive 4-way DC motor and 2-way steering gear; Drive 2-way DC motor and 1-way stepper motor and 2-way steering gear; Drive 2-way stepper motor and 2-way steering gear.
  • Application: Suitable for Arduino beginners, Arduino experimental equipment platform, Arduino interactive electronics, Arduino robot, etc.
34
Image

Product Highlights

  • ★ Package Included - 1pcs L298N Motor Driver Controller Board Modules.
  • ★ Item Size - External size 43*43*27mm / 1.69*1.69*1.06 inch. Drive voltage 5V-35V, high working power to 46V. Large current can reach 3A MAX and continue current is 2A. Power to 25w.(NOTE: To avoid damage, please use an external 5V logic supply when using more than 12V driving voltage.)
  • ★ High Quality - Use L298N as the main driving chip, so the module has such features as strong driving ability, strong anti-interference and low calorific value. And it also use large-capacity filter capacitor and diode with freewheeling protection function, thereby improve the reliability of module.
  • ★ High Efficiency - Dual-channel H-bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
  • ★ Easy of Use - No assembly required. This L298N board comes ready to go. Just wire up motors and power, this thing will work wonders.
36
Image

Product Highlights

  • [High Quality] Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects
  • [High Efficient] Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient
  • [Easy to Use] No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use
  • [Parameter] External size 43*43*27mm / 1.69*1.69*1.06 inch, voltage 5V-35V, drive current 2A (Max single bridge)
  • [Wide Usage] Great for for Arduino DIY Smart Car Robot Power UNO MEGA R3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits
37
Image

Product Highlights

  • Double BTS7960 large current H bridge driver, limit up to 43A large current output, with a strong drive and brake effects
  • With the microcontroller 5V isolation, effective protection of single-chip; Using 74HC244 chip to effectively isolate the microcontroller and motor drive.
  • Can achieve the motor forward rotation and reversal rotation. Two PWM input up to 25kHZ frequency;
  • Overcurrent and overheating error signal output; Over temperature, overvoltage, undervoltage, overcurrent protection, short circuit protection
  • Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; The supply voltage is 5.5V to 27V
38
Image

Product Highlights

  • HiLetgo Stepper Motor+ Driver Board
  • Stepping angle: 5.625 X 1/64
  • Diameter: 28mm
  • Voltage: 5V
  • Speed down stepping motor
39
Image

Product Highlights

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
  • Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
41
Image

Product Highlights

  • L293D is a monolithic integrated, high voltage, high current, 4-channel driver
  • Basically this means using this chip you can use DC motors and power supplies of up to 12 Volts
  • The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.
  • Thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what's known as a type of H-Bridge.
  • Can drive 4 DC motors or 2 stepper motors or 2 Servo.
42
Image

Product Highlights

  • 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes.Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Tested compatible with Arduino UNO, Leonardo, ADK/Mega R3, Due, Diecimila & Duemilanove. Works with Mega/ADK R2 and earlier with 2 wire jumpers.
  • The original L293D Motorshield kit is one of our most beloved kits, We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements.
43
Image

Product Highlights

  • This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip.

  • Using this chip you can use DC motors and power supplies of up to 10Volts, that some pretty big motors and the chip can supply a maximum current of600mA per channel.

  • Tested compatible for Arduino Mega, Diecimila & Duemilanove.

  • 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter.

  • Multi-function, easy to operate, a strong driver library support and feature updates.

44
Image

Product Highlights

  • This is a good parts kit for an Arduino and raspberry pi based RC car project. It not only comes with 4pcs wheels and motors, but also 2pcs motor drive modules and 60pcs jumper wires, which are very useful accessories for your project.
  • Motor Drive Controller: L298N used as the main driver chip. It has the strong driving ability, low calorific value and strong anti-interference ability.
  • TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
  • Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber.
  • To avoid damage the voltage stabilizing chip of Motor Drive Module, please use an external 5V logic supply when using more than 12V driving voltage.
45
Image

Product Highlights

  • The Motor Shield is based on the L298NH, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors.
  • It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. You can find in the Getting Started section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics.
  • The adapter can be connected by plugging a 2.1mm center-positive plug into the Arduino's board power jack on which the motor shield is mounted or by connecting the wires that lead the power supply to the Vin and GND screw terminals.
  • This shield has two separate channels, called A and B, that each use 4 of the Arduino pins to drive or sense the motor. In total there are 8 pins in use on this shield. You can use each channel separately to drive two DC motors or combine them to drive one bipolar stepper motor.
  • If you don't need the Brake and the Current Sensing and you also need more pins for your application you can disable this features by cutting the respective jumpers on the back side of the shield. Free running stop and brake function.
46
Image

Product Highlights

  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
  • Use eight high-speed Schottky diodes at motor output as protection.
  • Stack design can be directly plugged into the Arduino, easier to use.
  • The L298P shield DC motor driver has PWM speed control mode; dual high-power H-bridge driver.
  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input.
47
Image

Product Highlights

  • Operating voltage: 5V to 12V
  • Motor controller: l298p
  • Drives 2 dc motors
48
Image

Product Highlights

  • Short Height
  • 13Ncm(18.4oz.in) holding torque
  • NEMA 17 bipolar 1.65"x1.65"x0.79" 4-wire
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 1.0A & resistance 3.5ohms
49
Image

Product Highlights

  • 9V-42V DC power supply, H bridge bipolar constant phase flow drive.
  • The largest 32 subdivision of the 6 models are optional
  • The maximum 4.0A of the eight kinds of output current
  • Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
  • Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.
50
Image

Product Highlights

  • PARAMETER --- driving voltage 5V-35V; driving current 2A max each channel; max power 25W; logic voltage 5V; logic current 0mA-36mA.
  • APPLICATION --- used as DC motor driver, stepper motor driver, relay coil and other inductive load driver; able to drive one two-phase stepper motor/one four-phase stepper motor/two DC motors.
  • WORKING MODE --- dual H bridge driving, dual output.
  • FEATURE --- strong driving ability, low heat generation, strong anti-interference ability.
  • CONFIGURATION --- L298N chip, large-capacity filter capacitors & diode with freewheeling protection function.

"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates". AS AN AMAZON ASSOCIATE, WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES.

JUMP TO [Show]