Best Fj Cruiser Spare Battery Tray for 2024

By Customer Ratings

1
Image

Product Highlights

  • The battery tray should be powder-coated black to match the other components
  • Include a positive and negative terminal for connecting the battery
  • Allow easy access to the battery for maintenance and replacement

2
Image

Product Highlights

  • Start Dead Batteries - Safely jump start a dead car battery in seconds with this compact, yet powerful, 3000-amp portable lithium car battery jump starter pack - up to 40 jump starts on a single charge - and rated for gasoline engines up to 9 liters and diesel engines up to 7 liters.
  • UltraSafe - Safe and easy to use car battery jump starter pack without the worry of incorrect connections or sparks. Safely connect to any 12-volt automotive car battery with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
  • Multi-Function - It's a car jump starter, portable power bank, LED flashlight, and 12-volt portable power. Recharge smartphones, tablets, and other USB devices. It's easily rechargeable from any powered USB port in 6 hours at 2.1-amps. An integrated 500-lumen LED flashlight with seven light modes, including emergency strobe and SOS. Plus, a 12-volt, 15-amp outport port for powering any 12VDC devices, like tire inflators, inverters and more.
  • Advanced Design - Our most advanced portable car battery jump starter ever. Featuring high-discharge lithium technology for safe operation in any climate. A rugged and water-resistant enclosure rated at IP65. A rubberized over-molded casing to prevent scratching or marring of surfaces. Allows rapid charging in 2-hours via the vehicles auxiliary port. And an ultra-compact and lightweight design weighing just 7.5 pounds.
  • In The Box - GB150 UltraSafe Portable Lithium Car Battery Jump Starter Pack, Needle-Nose Battery Clamps, XGC Male and Female Connectors, XGC Cable, Micro USB Charging Cable, Microfiber Storage Bag, User Guide, 1-Year Warranty, and Designed in the USA.
3
Image

Product Highlights

  • Universal stainless steel battery tray holder, Kit comes complete as pictured
  • Battery tray measures 7 1/2" wide and 13 1/4" long
  • Top battery hold down will hold batteries up to 6 7/8" wide
  • Kit includes the battery tray, j hooks, hold down, washers & t nut fasteners
  • hooks are zinc plated steel & t nuts are chrome plated steel
4
Image

Product Highlights

  • THEPRO Steel Universal Battery Trays have a vinyl coating for rust and corrosion resistance.
  • The groove design prevents the battery from contacting the tray fasteners; the Battery Hold-Down Tray has a solid structure, good load-bearing capacity, and durability. There have 3 choice battery tray sets, please read the description to select the one you need.
  • [27cm J bolt with 34cm Battery Tray Kit] 27cm(10.6inch) J Bolt with Adjustable Hold Down from 146-203mm(Adjusts to suit battery width 146-203mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 4, 24, 27, 29, 31, 60, 74 & 77
  • [23cm J bolt with 34cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 65, 48, 94R
  • [23cm J bolt with 28cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 280mm(11in) Battery tray 7.36 in(187mm) width, 10.94 in(278mm) length, fits group 34, 74, 77, 78, 54, 55
5
Image

Product Highlights

  • Pilida billet battery tray has recessed design compatible with the specific Optima Battery that you bought the tray
  • Fit for common optima battery grop sizes, Blue top group 34M, D34M, Red top group 34, 34/78 (DOES NOT FIT 34R), Yellow top group D34, D34/78 ( DOES NOT FIT D75 GROUP SIZE 75)
  • The battery relocation kit are made of high performence billet aluminum. More durable, not easy to rust, and high anti-corrosion.
  • The overall outside dimensions of billet battery tray are 11.2“ x 7.9”. Battery Mount Kit Includes As Pictures: 1 battery tray, 2 hold down tabs, 4x10mm bolts, 6x8mm bolts, 4 bolt washers, 6 nuts.
  • 12 MONTHS WARRANTY: All battery tray of Pilida have 12 months warranty serve. Any questions about installation of battery tray and adaptability of battery tray and more, please feel free to contact us, we will reply you soon.
6
Image

Product Highlights

  • Battery tray secures a single group 29 or 31 battery
  • 13-3/16 in. L x 7-5/8 in. W x 1-1/2 in. H
  • Ideal for applications that do not require batteries to be completely encased.
  • Meets U.S. Coast Guard regulations
  • Includes quick-disconnect buckle
  • Mounts with #10 pan head screws
7
Image

Product Highlights

  • 12-Volt, 800 Cold Cranking Amps, Size: 10" x 6 7/8" x 7 13/16" tall, Weight: 37.9 pounds, SAE Post. C20 Capacity: 50 Ah. CCA: 800 Amp
  • Reserve capacity of 100 minutes for constant performance
  • Optimal starting power even in bad weather; Case Material: Polypropylene
  • Fifteen times more resistant to vibration for durability
  • This item is not for sale in Catalina Island
8
Image

Product Highlights

  • Black
  • OE Style
  • Direct fit
  • Limited 5 Year Warranty
9
Image

Product Highlights

  • This battery tray is designed to securely mount your battery in your vehicle using sturdy base plates and hold-down plates and includes heavy duty 3/8" hardware
  • Bottom tray will accept batteries up to 10.5" Length x 6.95" width x 6.7" height with provided thread sleeves(batteries over 7.4" tall will require longer 3/8-16 all-thread).
  • Compatible with Most Car and Truck batteries including the following optima sizes: Red top: 34, 34R, 34/78 & Yellow top: D34, D34/78 & Blue top: 34M, D34M (may fit other optima battery sizes)
  • Made in the USA from aerospace grade billet aluminum
  • Package includes: 1 base plate, 1 top plate, 3 all-thread hold downs with nuts, 3 thread sleeves
10
Image

Product Highlights

  • CAR WASH PROOF – Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! Our redesigned 6 3/4" (Effective 03/20/2019) now stouts a new level of strength, so much so that we guarantee and replace any that break in a car wash within 2 full years from purchase date. If it breaks, we issue a replacement. Its strength is Tried, Tested and Proven. Same Superb Reception, New Strength Standards!!!
  • STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your truck is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
  • UNMATCHED RECEPTION / PROMISED PERFORMANCE - Our 6 3/4" German Engineered Antenna uses choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results. If you're not 100% satisfied with performance, return your antenna for a full refund!
  • EXCLUSIVITY - Our 6 3/4" is exclusively made for us by a premium OEM manufacture, its levels of performance and durability will not be found elsewhere. The authenticity of our 6 3/4" can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it’s important to have an assuring mark knowing you got the real deal. The quality level of our 6 3/4" must not be confused with attempted duplicates.
  • EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your truck
11
Image

Product Highlights

  • Compatible with Traxxas HSP Redcat RC4WD Axial SCX10 D90 HPI Tamiya CC01 1/10 RC Crawler Car
  • Made of high quality carbon fiber,which is eco-friendly, solid and durable.
  • Plate Size:Approx. 153mmx62mmx2mm/6x2.4x0.07 inch
  • Comes with 2 straps for easy mounting battery, and the hoop and loop fastener is for better fixation.
  • Easy to install and durable in use,light weight and it will not add extra burden to your remote control car.
12
Image

Product Highlights

  • Direct replacement - this battery tray matches the fit and function of the original equipment part
  • Durable construction - this battery tray is made from quality materials to prevent damage caused by an unsecured battery
  • Cost-effective solution - offers original equipment quality at lower cost than dealer replacement
  • Quality tested - this part has undergone vehicle fitment and dimensional testing
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
13
Image

Product Highlights

  • The battery trays wildly are used in holding down your battery in your vehicle
  • Fit for most car & truck batteries, includes optima series red top group 34, 34R, 34/78, blue top group 34M, D34M; yellow Top group D34, D34| 551181| 78
  • The overall outside dimensions of billet battery tray are 11.25“ x8.5”, fits batteries within these sizes: 10.5"(length)X6.95"(width) X6.7"(height)
  • The battery relocation kit are made of high performence billet aluminum. More durable, not easy to rust, and high anti-corrosion
  • 12 MONTHS WARRANTY: All battery tray of Pilida have 12 months warranty serve. Any questions about installation of battery tray and adaptability of battery tray and more, please feel free to contact us, we will reply you soon
14
Image

Product Highlights

  • Complete Battery Tray Kit Made from high quality stainless steel, Corrosion resistant , Brightly polished finish
  • Universal Design; Widely Application; Perfect for marine use
  • Width: 7 1/2" and Longth: 13 1/4"; Top battery hold down will hold batteries up to 6 7/8" wide.
  • Battery Tray Kit included the battery Tray, J HOOKS, Hold down, Washers & T Nut Fasteners; All products will be sent to customers in the most complete form, easy to use and install.
  • Quality products, fast delivery,excellent service. We make every effort to provide customers with satisfactory service. If you have any questions, please contact us immediately, we will solve it for you as quickly as possible.
15
Image

Product Highlights

  • STAY CHARGED: The powerful 5 amp charger provides a full charge to your automotive vehicle’s battery before automatically going into float mode to maintain proper voltage levels without overcharging. 5 amps 12 volt charger/maintainer
  • CONNECT AND FORGET: With a low maintenance design, our universal powersport vehicle charger and maintainer is compact, lightweight, and easy to operate even in small storage space for your convenience
  • EXTENDED BATTERY LIFE: Compatible with lead-acid, flooded, and sealed maintenance free batteries (AGM and gel cell) and ideal for use in long term storage to provide and maintain an optimal charge. Input voltage 120VAC @ 60 Hz
  • MONITOR POWER LEVELS: A solid state two-color LED light indicates the charging status and if the battery voltage drops too far under load, ISM adaptive charging will resume full charger output power. It is UL/CSA, CE and BC approved
  • SAFE AND SECURE: Our battery charger and maintainer is spark-proof during lead connection and automatically detects reverse polarity to ensure a correct, locked-in connection before providing power. 5 year warranty.4-Step Fully Automatic Charging (Initialization, Bulk, Absorption, Float)
16
Image

Product Highlights

  • Part Name:Front Battery Tray
  • Fit for:1/10 RC Crawler Car,AXIAL SCX10 90021,90022,90027,90028,90035,90044,90036,90037,90046
  • Material:Carbon Fiber; Color:Black; Weight:48g
  • It is a refit parts/upgrade parts,shifting the weight balance of your SCX10 to the front with this front battery mount plate.
  • High quality and installation is very simple.(NOTE:without include instructions,if you don't know how to assembly,please feel free to contact us,we are always here to help you)
17
Image

Product Highlights

  • Inside Dimensions: 7" L x 11" W, Battery Series: 24/24M
  • A simple-to-install battery holder that fits into a limited space. For batteries up to 10-1/2" in height
  • Provides simple installation for changing or replacing batteries. The polypropylene hold-down strap has a positive locking, quick disconnect buckle
  • Molded base mounts with four #10 panhead screws.
18
Image

Product Highlights

  • Relocate the battery from tight locations to where you have more room, or to improve weight distribution with a secure and economical weld-in solution
  • Battery holder is compatible with batteries up to 10.75" wide x 7" deep x 9" tall
  • Universal fit for any custom applications (automotive, marine, off road, etc)
  • Constructed of premium 16 gauge raw steel with 2" hanger tabs to allow for easy welding and your custom finish
  • Zinc plated J bolts with locking nuts securely clamp the battery in place
19
Image

Product Highlights

  • A rugged battery tray for group 31 batteries, including marine, RV, camper, and trailer batteries.
  • Features a heavy-duty 42-inch hold-down strap with nylon resistant webbing that withstands a tensile load of over 120 kilograms of force.
  • Impact-resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure.
  • Keeps your battery securely mounted and limits battery movement during transportation and operation.
  • Meets United States Coast Guard (USCG) Code of Federal Regulations 183.420, American Boat and Yacht Council (ABYC) E-10.7 specifications, and frustration-free packaging.
20
Image

Product Highlights

  • Material: Silicone
  • Dimension: 100mm*30mm*2mm
  • Easy to cut and easy to use, stick to the lipo battery well
  • This mat is made of silicone with adhesive paste in one side
  • It can effectively prevent the battery from sliding in the frame kit
21
Image

Product Highlights

  • Stainless steel
  • OE Style
  • Direct fit
  • Limited 5 Year Warranty
22
Image

Product Highlights

  • Fit for Toyota FJ Cruiser 2007-2010 Hood
  • Extended Length [in] 17.00
  • Compressed Length [in] 11.25
  • BOXI Auto Parts is THE MANUFACTURER and THE ONLY RESELLER of BOXI Lift Support ON Amazon. *** IMPORTANT*** TO VERIFY FITMENT. Please See Product Description Below or Contact Us and Provide THE YEAR / MAKE / MODEL OF YOUR CAR.
23
Image

Product Highlights

  • ►SAVE TIMEFRUSTRATION AND MONEY - No need to go to a auto parts store and look for different fasteners.We have them in box for what you need.
  • ►EASY USAGE - Get all you need in this box, save time and money for you. For Mechanic, Car modification lover ect
  • ►BONUS FASTENER REMOVER - Allow you to quickly and easily remove the car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
  • ►STURDY AND DURABLE NYLON MATERIAL: these car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • ►UNIVERSAL FIT KIT - Package including multiple sizes from 6.3mm to 10mm among total 240PCS for most uses, fitting for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers replacement,compatible with Ford, GM, Chrysler, Toyota, Honda and more. All packed in a plastic container for easy organization and storage.
24
Image

Product Highlights

  • Safe and Eco-friendly: The car beauty keyboard cleaning gel is made of high quality biodegradable gel material, non-sticky and smells like a light lemon fragrance. It is non-irritating to the skin and is environmentally safe.Cleaning gel can be a stress-relieving toy that lets you release stress.
  • Reusable: This car cleaning gel can be used multiple times until the gel darkens. After use, store in a sealed box in a cool, dry place. ( Note: Do not wash all-purpose cleaning gel with water. )
  • Multiple uses: Car Dust Cleaning Gel not only cleans your car's air vents, dashboard vents, gear shift lever, knobs, door handles, air vents and CD slot, also suitable for crevices in remote controls, landlines, calculators, fans, digital cameras, etc. The suitable surface must be waterproof or the cleaning putty will stick to it.
  • Easy to use: Compared to regular car cleaning tools, this car cleaning gel is softer and easier to clean dirt from crevices in your car. First, take a small piece of gel and knead it before use, then slowly press the cleaning gel into a sturdy surface such as the car's air vents, and then slowly pull it out and the dust will be carried away by the gel.
  • Purchase with Confidence: Any issues or questions please feel free to contact us, we are always here to satisfy all of you.
25
Image

Product Highlights

  • Bottom tray will accept batteries up to 10.5" Length x 6.95" width x 6.7" height with provided thread sleeves(batteries over 7.4" tall will require longer 3/8-16 all-thread).
  • This battery tray is designed to securely mount your battery in your vehicle using sturdy base plates and hold-down plates and includes heavy duty 3/8" hardware
  • Compatible with Most Car and Truck batteries including the following optima sizes: Red top: 34, 34R, 34/78 & Yellow top: D34, D34/78 & Blue top: 34M, D34M
26
Image

Product Highlights

  • Premium iron crossbar & Stainless steel j bolt sets,anti-rust, sturdy and available for long service life.
  • Adjustable crossbar, from 5.35" to 7.85" wide,available in 8/10/11 inch j bolts.
  • Exclusive finishment,thermoset baked-on Premium powder coat finish for a bright and durable surface.
  • Simple design,easy installation, directly replace your broken one, convenient to use.A perfect modification accessory for racing, sports car, RV,boats,etc.
  • Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length.
27
Image

Product Highlights

  • Holds Batteries in Place: Safely holds group 24/24M automotive batteries to prevent movement during transportation
  • Safe and Durable Construction: Constructed of heavy-duty, acid-resistant plastic with stainless steel hardware
  • Fit: Fits batteries up to 11 1/8-inches (L) x 6 ¾-inches (W) x 8-inches (H)
  • Overall Dimensions: 11 9/16-inches (L) x 8 ½-inches (W) x 9 5/8-inches (H)
  • Includes: (1) tray, (2) rods, (1) cross bar and (1) knob
  • Meets U.S. Coast Guard Specifications: Meets Coast Guard CFR 183.420 and ABYC E-10.7 specifications
  • Patented: Patented design
28
Image

Product Highlights

  • Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 24 battery
  • Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
  • Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
  • Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
29
Image

Product Highlights

  • Secure replacement - this battery hold down replaces a worn, stripped or missing original equipment hold down
  • Maintains battery - reducing battery movement helps ensure maximum battery life
  • Check fit - to see if you have correct hold down, check application fit, size or style
  • Trustworthy quality - backed by team of engineers and inspectors in the United States
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
30
Image

Product Highlights

  • Designed for Optima Batteries - marine grade battery tray is designed specifically to house your favorite Optima batteries
  • Rugged and Durable - battery tray is composed of tough plastic that is UV and corrosion resistant
  • Universal Fit - box fits Optima D27M and D31M series boat, RV, and trolling motor batteries - durable poly strap features a stainless steel buckle to hold the battery firmly in place
  • Safe to Use - resistant to gasoline, oil, acid and most chemicals to protect your engine compartment and electrical components
  • Easy Installation - tray features 8 mounting slots to secure your battery firmly in place
31
Image

Product Highlights

  • Function: Designed to mount the battery in your vehicle securely with sturdy base plates, and hold-down plates, and includes heavy duty 3/8" hardware.
  • Compatibility: Fits for Most Car and Truck batteries, including following optima sizes: Red top (34, 34R, 34/78) & Yellow top (D34, D34/78) & Blue top (34M, D34M) (May fits for other optima battery sizes)
  • Wide Application: Overall dimensions of the base plate are 11.25" long by 8.5" wide. The bottom tray can accept batteries up to 10.5 in Length x 6.95 in width x 6.7 in height with provided thread sleeves (batteries over 7.4" tall will require longer 3/8-16 all-thread).
  • Package Included: 1 x Base Plate, 1 x Top Plate, 3 x All-Thread Hold Downs with Nuts, 3 x Thread Sleeves. Made of High Grade Aluminum with high precision and strength, anti-rust and corrosion for great durability, providing a long lasting service time.
  • Satisfaction Guarantee: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 months’ Warranty. If you have any problems about our products, please feel free to contact us.
32
Image

Product Highlights

  • EXTENDED WIRELESS COVERAGE: Adds Wi-Fi range coverage up to 1000 sq ft, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more.
  • AC750 WI-FI SPEED: Provides up to 750Mbps performance using dual-band and patented FastLane(TM) technology.
  • UNIVERSAL COMPATIBILITY: Works with any wireless router, gateway, or cable modem with Wi-Fi.
  • WIRED ETHERNET PORT: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed.
  • SAFE & SECURE: Supports WEP and WPA/WPA2 wireless security protocols.
  • SIMPLE TO SETUP: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location.
33
Image

Product Highlights

  • Premium 6061 aluminum crossbar & 18-8(304) Stainless steel j bolt sets.
  • Designed for batteries 6.89" (175mm) wide or slightly narrower.
  • Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks.
  • Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture.
  • Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries)
34
Image

Product Highlights

  • Direct replacement - this battery tray matches the fit and function of the original equipment part
  • Durable construction - this battery tray is made from quality materials to prevent damage caused by an unsecured battery
  • Cost-effective solution - offers original equipment quality at lower cost than dealer replacement
  • Quality tested - this part has undergone vehicle fitment and dimensional testing
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
35
Image

Product Highlights

  • Holds 27, 30, 31 series style batteries
  • Heavy-Duty acid-resistant plastic
  • Stainless steel hardware
  • Meets Coast Guard CFR 183.420 and ABYC E-10.7 specifications
  • Patented
36
Image

Product Highlights

  • Prolong the Life of Your Battery and Protect Against Premature Battery Failure.
  • Absorbs Up To 80% OF the G-Shock Caused by Excessive Shock & Vibration.
  • Great for Boats, RVs, Semi Trucks, Heavy Equipment, and Off-Road Vehicles.
  • Prevent Damage from Road Impacts, Rough Water, and Mechanical Vibration. Made in the USA.
  • Fits Virtually Any Size Battery Up to Group 31; Easily Trimmed to Custom Shapes or Sizes.
37
Image

Product Highlights

  • Start Dead Batteries - Safely jump start a dead battery in seconds with this compact, yet powerful, 1000-amp portable lithium car battery jump starter pack - up to 20 jump starts on a single charge - and rated for gasoline engines up to 6 liters and diesel engines up to 3 liters.
  • UltraSafe - Safe and easy to use car battery jump starter pack without the worry of incorrect connections or sparks. Safely connect to any 12-volt automotive car battery with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
  • Multi-Function - It's a car jump starter, portable power bank, and LED flashlight. Recharge smartphones, tablets, and other USB devices. It's easily rechargeable from any powered USB port in 3 hours at 2.1-amps. Plus, an integrated 100-lumen LED flashlight with seven light modes, including emergency strobe and SOS.
  • Advanced Design - Our most advanced portable car battery jump starter ever. Featuring high-discharge lithium technology for safe operation in any climate. A rugged and water-resistant enclosure rated at IP65. A rubberized over-molded casing to prevent scratching or marring of surfaces. And an ultra-compact and lightweight design weighing just 2.4 pounds.
  • In The Box - GB40 UltraSafe Portable Lithium Car Battery Jump Starter Pack, Heavy-Duty Battery Clamps, 12-Volt Car Charger, Micro USB Charging Cable, Microfiber Storage Bag, User Guide, 1-Year Warranty, and Designed in the USA.
38
Image

Product Highlights

  • Effective space saving: These universal headrest hooks can organize your back seat and floor debris in an orderly manner, avoiding grocery and shopping bags from rolling on the floor, and also prevent your handbag and food bag from driving Fall off the seat.
  • Easy to install: You can easily install these hooks without removing the headrest and without additional tools.
  • Powerful load capacity: Each box contains four hooks, and the sturdy material makes it able to bear 44 pounds and handle most of the sundries in the car.
  • High-quality abs material: These car headrest hooks are made of durable abs material and won't break easily. The smooth edge design can prevent adults and children from being scratched and can be used with confidence.
  • Buy with confidence: If you have any question please feel free contact us.
39
Image

Product Highlights

  • Optima Battery Box Tray
  • USA Designed & Manufactured
  • 11 Gauge A1008 Mild Steel, Box Cut & Laser Cut In-house
  • Fits Optima Batteries: Red 34/78 Yellow 34/78 Blue 34/78
  • BATTERY NOT INCLUDED
40
Image

Product Highlights

  • Heavy-duty, Non-corrosive black plastic. Inside Dimensions: 12-5/8 inch x 7-1/4 inch x 8-1/2 inch (WxDxH). Fits 27/27M Series Batteries
  • Heavy-duty, non-corrosive black plastic
  • Install with number 10 screwsMeets ABYC standard E-10 and U.S. coast guard requirements
  • Includes adjustable-height crossbar and two retaining bolts
41
Image

Product Highlights

  • RETURNS AUTHORIZEDAMAZON WILL NOTACCEPTED
  • 1- True UTV-SBI-18 Isolator with silicon insulators andDual Lock fastner
  • 1- 36mm blue led volt meter with dual rdisplay (requires29mm mounting hole), inludesx 18ga duplex wire with connectors
  • 1 ea- Trueinch sealed 6ga Red and Black Cables with 6mm lugs
42
Image

Product Highlights

  • Compatible with all 12V, 8V, and 6V automotive, powersports, and marine Battery Tender chargers
  • Charger under 5 AMP is recommended
  • Includes internal 3 AMP fuse
  • Cable length: 18 inches, 16 AWG wire
43
Image

Product Highlights

  • For Optima Battery: Red 34/78, Yellow 34/78, Blue 34/78.
  • Battery Tray is Made of 11 gauge A1008 mild steel, laser cut to provide higher strength support.
44
Image

Product Highlights

  • 12-Volt, 720 Cold Cranking Amps, Size: 9.38 x 7.69 x 6.75-Inches Weight: 31.7 pounds, SAE Posts
  • Reserve capacity of 90 minutes for constant performance
  • Optimal starting power even in bad weather. Case material is Polypropylene
  • Fifteen times more resistant to vibration for durability
  • This item is not for sale in Catalina Island
  • Fit Type: Vehicle Specific
45
Image

Product Highlights

  • Includes lift off lid, durable woven hold-down strap, foot clamps and stainless steel screws
  • Lightweight, heavy duty corrosion resistant polypropylene box
  • Fits group size 24 batteries
  • Inside Dimensions = 7 ¼ inch Wide X 10 3/4 inch Long X 8 inch Tall with 2 inch additional head room for battery terminals
  • Meets USCG CFR 183.420 and ABYC E 10.7 specifications
46
Image

Product Highlights

  • Perfect replacement for your old or cracked battery tray
  • Holds 2 group 27 deep-cycle marine batteries
  • Includes poly strap with quick-release buckle
  • Tough, durable build quality for a longer life
  • Meets all NMMA requirements
  • 14-1/8 in. L x 12-3/8 in. W x 1-1/8 in. H
47
Image

Product Highlights

  • Direct replacement - this battery tray matches the fit and function of the original equipment part
  • Durable construction - this battery tray is made from quality materials to prevent damage caused by an unsecured battery
  • Cost-effective solution - offers original equipment quality at lower cost than dealer replacement
  • Quality tested - this part has undergone vehicle fitment and dimensional testing
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool

"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates". AS AN AMAZON ASSOCIATE, WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES.

JUMP TO [Show]